Feature
●【EASY TO USE】: No need any tools. no drivers required. LED indicator lets you know the working status easily.
●【Dual Protocol PORTABLE ENCLOSURE】: This M.2 external duplicator for SATA M.2 2242 2260 2280 22110 SSDs, Supports 2 M.2 SATA SSD reads and writes at the same time.
●【ONE-KEY OFFLINE CLONE】: No need to connect to a PC, Just connect in the power and long press the bottom right button then you can back up your important data. Support one- key system disk copy.
●【HIGH-SPEED】: USB Type-C supports up to 5Gbps.Theoretical transfer speed up to 500MB/S.This hard drive duplicator is equipped with C to C cable, A to C cable and a 5V-3A power adapter.
●【Efficient heat dissipation】: Designed for Heat Dissipation. The aluminum alloy shell is used, and the silicone heat sink is added for efficient heat dissipation and more stable data transmission for a long time.
●【WIDE COMPATIBILITY】：Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, router and other devices.
●【NOTE】: The data cable of the DCIN USB interface cannot be connected to the computer, it must be connected to the power plug. The PC interface is connected to the computer. Otherwise the equipment will fail.
[SATA M.2 enclosure]
[nvme sata clone enclosure]
[NVME AHCI Clone]
Description
Application scenarios
- Easy installation, Tool-free design, no driver required.
- One-Key Offline Copy Clone Function
- 2 M.2 SATA SSD reads and writes at the same time.
- Type-C 3.1 5Gbps high-speed transfer
- Suitable for 2242/ 2260/ 2280/22110 M.2 SATA SSD.
- LED indicator lets you know the working status easily.
- The 5V-3A power adapter , better dissipation performance.
- Operating system compatibility: Windows, macOS, and Linux.
- Can connect to PC, laptop, smart TV, PS4 and other devices.
- NOTE ：Before buying, Please Check Your M.2 SSD is SATA Channel.
Product introduction
|
|
|
|
|---|---|---|
Tool-free designno tools need, just press and pull out the bracket, and connet power then insert SSD. |
Efficient heat dissipationMade of Aluminum alloy shell, and offered with 2 silicone and 2 aluminum heat dissipating pads. |
WIDE COMPATIBILITYCompatible with Windows/Mac/Linux. Can be used to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4 and other devices. |
Warm tips
Note:
- This external drive docking station support all SATA M.2 SSD.
- When using the Offline Clone Duplicator, the capacity of ‘2’ SSD must be bigger than the capacity of ‘1’ SSD , otherwise the clone cannot be completed.
- Offline Clone Function cannot be connected to the computer.Only supports offline clone.
- SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.
- Make sure that the two SSD disks can be recognized on the computer when plug in our SATA M.2 Duplicator.If not, it could not clone.
- Its normal that the Device heats up, for the high-speed SATA M.2 drives generate much heat while working. Do not touch the SSD during operation.
- For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition.
- If you need to take out the SSD, please pull out the power first, and then take out the SSD.
- The clone function does not support encrypted SSD. Before operating the clone, you need to decrypt the hard disk first.