[US]
Specification:
Item Type: Cell Phone Signal Enhancer
Material: Aluminum
Working Frequency :
Uplink: 890 915MHz
Downlink: 935 960MHz
Gain (dB):
Uplink Gp≥55 Downlink Gp≥60
Output Power (Po): ≤21dBm±3dBm
Flatness: ≤3dB
Impedance: 50Ω/N
Noise Figure: ≤4dB
Connector Type: N female
Transmission Delay: ≤0.5μs
Ambient Temperature: 10℃~60℃
Working Voltage: AC110~240V 50~60Hz
EMC ETSI EN 301 489 1 V1.9.2
EMC ETSI EN 301 489 8 V1.2.1
Function Instructions:
a) Power indicator (Digital Display Bar)
b) Output power indication (Digital Display Bar)
Coverage Area 100 1500 square meter (A large area requires multiple indoor antenna sets)
How to deal with no effect after installation
A. First confirm that there is a mobile phone signal at the outdoor antenna end, and reach ( 50dm or more, whether the signal indicator scale is full
B. Make sure that the amplifier, antenna and other related accessories are selected correctly
c. Confirm that all lines, distributors, antennas, and amplifiers are connected correctly
After installation, the signal is improved, but no calls can be made
A. Confirm that the outdoor antenna is aligned with the base station
B. Confirm that the communication distance between the outdoor antenna and the base station is within 5 kilometers.
C. Confirm that the line between the outdoor antenna and the amplifier is not more than 40 meters, not more than 20 meters is more appropriate, and not less than 10
Package List:
1 x Host
1 x 10m Suction Cup Antenna
1 x Suction Cup Small Antenna
1 x Pen Antenna
1 x Instruction
1 x Power Adapter