[3 & 4 Inch | 6 Pack]
[3 & 4 Inch | 3 Pack]
[1 & 2 Inch | 2 Pack]
[1 & 2 Inch | 6 Pack]
Make sure you have a clean and square cut with cutter.
TIPS: If you are on copper pipe, we further advise to ream the inside to reduce the roughness.
Use deburr tool shown on the picture to ream the end of the pipe first and mark insertion depth on the pipe then.
Fully push both ends into the fitting until the depth line on the pipe covered. When pipe is not fully inserted, it will leave room for leakage.
Complete connection.
TIPS: Kindly conduct the water test before installation!
Position the disconnect clip next to the end.
Press firmly the disconnect clip against the collar of the end.
Pull the pipe out of the fitting with a twisting action.
Complete disconnection.
For bathroom installing, remodeling or repairing.
Angle-through flow pattern, on hot and cold water lines for service and repair purposes.
Straight-through flow pattern, on hot and cold water lines for service and repair purposes.
![]() COUPLING | ![]() ELBOW | ![]() TEE | ![]() END CAP | ![]() MALE ADAPTER | ![]() FEMALE ADAPTER | ![]() BALL VALVE | |
SIZE
| 3/4", 1/2", 1" | 3/4", 1/2", 1" | 3/4", 1/2", 1" | 3/4", 1/2", 1" | 3/4", 1/2", 1" | 3/4", 1/2", 1" | 3/4", 1/2", 1" |
QUANTITY
| 2, 6, 12 | 2, 6, 12 | 2, 6, 12 | 2, 6, 12 | 2, 6, 12 | 2, 6, 12 | 2, 6, 12 |
AVAILABLE PIPE CONNECTION
| copper, CPVC, HDPE or PEX | copper, CPVC, HDPE or PEX | copper, CPVC, HDPE or PEX | copper, CPVC, HDPE or PEX | copper, CPVC, HDPE or PEX | copper, CPVC, HDPE or PEX | copper, CPVC, HDPE or PEX |
MATERIAL
| Brass | Brass | Brass | Brass | Brass | Brass | Brass |
DISCONNECT CLIP INCLUDE
| ? | ? | ? | ? | ? | ? | ? |