Note:
1. The use of this type of electric heating device must be noted that its continuous use operating temperature should be less than 240℃, instantaneous does not exceed 300℃.
2. The silicone electric heating device can work and be pressed, that is, it is pressed against the heated surface by the auxiliary pressing plate. The heat conduction is good, and the current density can reach 3W/cm2 when the working temperature does not exceed 240 °C.
3. Under the installation condition of the paste, the working temperature is allowed to be less than 150 °C.
4. In the case of dry air in the air, the power density shall be less than 1 W/cm2 due to the temperature resistance of the material; in the case of non-continuous operation, the power density may reach 1.4 W/cm2.
5. The working voltage is selected according to the principle of high power - high voltage, low power - low voltage, and special needs can be listed.
Name:Name: 110V 250W 9X13cm Silicone Heating Plate For Car Engine Tank Heater
Model:A48644
Product Description
Material: alloy heating wire + silicone rubber
Color: Orange
Size: 9x13cm
Voltage: 110V
Power: 250W
Line length: 210cm
Features:
● High insulation performance, breakdown voltage up to 20~50KV/mm
● Silicone rubber heating plate is very convenient to install, it can be vulcanized by room temperature vulcanized rubber.
● Used for heating elements: The heating wire of nickel alloy is wound around the glass fiber, the heating power can reach 2.1W/cm2, and the heating is more uniform.
● Moisture-proof silicone rubber material provides longer heater life.
● Fast heating, uniform temperature, high thermal efficiency and good toughness
● Convenient, safe and waterproof
Application: Various automobile fuel tanks, water tanks, and batteries.
How to use? (Instructions)
Directly at