Feature
●【Compatible Lights】This installation accessories set is ONLY compatible with 8mm width COB LED Strip lights(Not applicable to 10 mm board width and CCT Tunable COB LED Strip Lights).The transparent middle connector will not block the light.Only compatible with 8mm wide COB strips, other sizes are not applicable
●【Solderless Extendable Connectors】Using this cob led strip extension kit you can extend your strip lights length to the power supply or connector, eliminating the issue of limited space. These accessories let you extend and connect light strips, extend the connection between the strip light and controller/power supply, and let you achieve a corner connection
●【5 Types of Mounting Accessories Included】4pcs of transparent gapless middle connectors,4pcs of Dual End jumpers with 6.7in/17cm 22AWG UL-Listed extension wire,1pc of Single End to DC Female Plug with 7.9in/20cm 22AWG UL-Listed extension wire,2pcs L-shaped/corner connectors,1pc T-shaped connector
●【Easy to Use】UPGRADED version kit,simple to install and no welding needed, this cob connector kit lets you DIY for a safe and easy job that will save you time and money.The advantage of the upgraded package is that it can be reset repeatedly and the installation is more convenient
●【Stable Connection】Stable connection for durable daily use.IMPORTANT NOTE:Before pressing the connection, please check whether the positive and negative poles of the light strip are consistent with the other end
[8 Strip to Wire + 4 L-Shaped(8mm)]
[8mm T-connector & Cross connector]
[8mm Cob Connectors & Upgraded Set]
[T connector for wiring]
Description
Please pay attention to Gapless connector to dc female head the positive and negative poles (the positive pole to the positive pole can be connected successfully)
The white wire is the positive pole and the black wire is the negative pole
COB connectors(8mm)
Specification
- - Compatible strip light type: 0.39inch (8mm) COB LED strip light
- - Wire length of PCB board to board jumpers: 6.7 inches
- - Wire length of PCB board to DC Female Head connector : 7.9 inches
Package Includes:
- 4 x Middle connectors
- 4 x PCB Board to board jumpers
- 1 x PCB Board to DC Female connector
- 2 x L-shaped/corner connectors
- 1 x T-shaped connector
The led strip connector kit provides some of the accessories required for your LED strips
The gapless led connector helps connect two single color flexible LED tape light and strip segments without soldering.
LED jumper connector is used for connecting led strip segments around the corner.
DC connector use 8mm strips ，Works with dimmable strip lights.
Internal Width: 8 mm
|
|
|
|
|
|---|---|---|---|
Cut the markPlease cut the light strip along the middle of the copper sheet |
Peel off the glueNote that when removing the tape, tear off the outermost layer of the tape |
Insert connectorPlease note that the positive and negative poles of the COB strips at both ends of the connector must be the same |
Close the capPlease note that the positive and negative poles of the COB strips at both ends of the connector must be the same |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| COB LED Strip Lights Warm White 3000K/9.84ft | COB LED STRIP LIGHT Daylight White 6500K/16.4ft | COB LED Strip Lights Warm White 3000K/24ft | COB LED Strip Lights White 4000K/20ft | Upgraded Mini RF Remote Single Color Dimmer | 24V DC Power Supply Adapter 24Volt 2A 48W | |
| length | 9.84ft /3m | 16.4ft/5m | 24ft/7.5m | 20ft /6.1m | / | 39.4in(100cm) |
| LED quantity （pcs） | 1512pcs | 2520pcs | 2520pcs | 2058pcs | / | / |
| color | Warm White/3000K | Daylight White/6500K | Warm White/3000K | Natural White/4000K | / | / |
| control methods | RF Remote | RF Remote | / | / | / | / |
| power supply | 24V/1A | 24V/1.5A | / | / | / | / |
| voltage | 24V | 24V | 24V | 24V | 5-24V | 24V |
| CRI | >85 | >85 | >85 | >85 | / | / |
| Width | 8mm | 8mm | 8mm | 8mm | / | / |
| Waterproof | Not waterproof | Not waterproof | Not waterproof | Not waterproof | / | / |