ELEGRP LIGHTING CONTROLS--Motion Sensor Light Switches

INNOVATIVE PIR TECHNOLOGY

The ELEGRP motion sensor switch uses passive infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. If the sensor detects human motion before the TIME delay elapses, the sensor will re-clock for another TIME setting cycle before it automatically turns off the loads. If the sensor switch is kept being triggered by human motions, it’ll keep the light on until time delay elapses and no human motion is being detected during this period, or manually switched off.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• Extremely low standby power consumption.
• Flame resistant material has reached the highest grade of 5VA.
• UL & CUL listed.

MULTIPLE SETTING MODES - Features multiple setting modes for different usage scenarios at home

????????????????????????????????????????????????????????????????????

Set It Into An Occupancy Sensor Switch - OCC Mode: Automatic ON & Automatic OFF

1. Set delay TIME to " ? " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity to “1”, “2” or "3" as desired. DO NOT set the LIGHT to " ? ".

The device will turn on the loads automatically when triggered by motion and turn off the loads automatically when the time delay elapses.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Set It Into A Vacancy Sensor Switch - VAC Mode: Manual ON & Automatic OFF

1. Set delay TIME to " ? " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity fully counterclockwise to " ? " to disable automatic ON function.

The device will turn on the loads manually only and turn off the loads automatically when the time delay elapses.

????????????????????????????????????????????????????????????????????

LARGE COVERAGE

This motion sensor switch provides an adjustable 120-degree field of view with optional adjustments for sensitivity, ambient light override, and delayed off time. The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for the porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

The inside LED indicator will flash when the sensor detects human motions.

Install the sensor switch about 4 feet from the floor to get a better experience.

Hot objects or moving air currents can affect the performance of the sensing switch.

The sensing switch requires an unobstructed view of room occupants to detect motion.

?????????????????????????????????????????????????????????????????????

Important FAQ:

1. Q: My house does not have the ground wire, can I use the neutral wire instead?

A: No! This motion sensor switch requires an effective ground wire. Check your house before ordering. The neutral wire is not required to connect.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2. Q: I connected all the wires, including the ground wire, but it did not work. Is the switch faulty?

Q: I connected all the wires, but the light stays on all the time, I could not turn off the light even manually. Is the switch faulty?

A: There may be 2 reasons:

1): The Hot and Load wires are reversed. Please simply reverse the black and red wiring of the sensor switch, and try again.

2): The ground wire is not connected well or the ground wire is ineffective. Please consult a professional electrician.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

3. Q: How do I know if it is wired correctly or not?

A: Please check if the LED indicator inside the motion sensor switch flashed or not when you approached it?

1) If yes, it means that this motion sensor switch was wired correctly.

2) If not, it means that this motion sensor switch was false wired or un-grounded. Please rewire the sensor switch. If the LED inside the motion sensor still doesnt flash, the most probable cause is that the ground wire is ineffective, please consult a professional electrician.

?????????????????????????????????????????????????????????????????????

PRODUCT SPECIFICATION

Input Rating: 120 - 277V, 60Hz

Lamp Type: 300W LED, 300W CFL, 600W Incandescent

Switch Type: Single Pole / Two Location Control

Wire Gauge: #14 - #12 AWG

Wiring Type: Terminal cap

Operating Temperature: 32℉ to 104℉ (0℃ to 40℃)

Product Size: 4.17x1.73x1.77" (106x44x45mm)

Wall Plate Size: 4.5x2.75 (114.3x69.8mm)