Feature

●Easy to monitor loved ones getting out of bed or leaving the room，Wireless motion sensors can be placed on the floor under the bed to trigger an alarm when the patients foot is about to touch the ground, or they can be placed at the door to monitor loved ones leaving the room,It transmits the signal to receivers within the 918ft in open area.
●The bed alarm does not sound in the patients room, potentially startling them and causing a fall,The motion sensor would start self-test procedure first when it is turned on (the indicator light would slowly flash 20 seconds),after the light turned off,the machine get into work state,Please test the sensing range and direction before fixing
●Unlike traditional bed sensor pads, the motion sensor can simply be placed on the floor under the bed to accurately detect when a patients foot touches the floor when getting up, without worrying about false alarms from patient incontinence and displacement, and at a fraction of the cost to you.
●Dual reminder (LED light/sound) and dual power supply (alkaline battery/Micro USB)
●1 Caregiver Pager (includes batteries 3*AA) 1 Motion Sensor (includes batteries 3*AAA) 1 Micro USB 1 double-sided tape 1 screw kit and manual.

[1 Caregiver Pager+1 Sensor]





Description

GOOD HELPER

bed_alarm_for_elderly_Netshaobed_alarm_for_elderly_Netshao

Monitor Motion with Ease

  • The receiver supports alkaline batteries or Micro USB so you can take it with you (please pay attention to the working reception range)

Motion Sensor Alarm for Elderly/Child/Visitor

child_safety_alarmchild_safety_alarm

Freely Monitor Movement Remotely

HOUSEWORKHOUSEWORK

SLEEPSLEEP

WORKWORK

HOUSEWORK

SLEEP

WORK

Colorful LEDColorful LED

bed_alarm_elderlybed_alarm_elderly
Wireless Sensor Monitoring

  • The sensor is placed along the bedside of the person with special needs. While the person moves, the sensor will alert the caregiver in no time.

Colorful LED and 32 Melody

Two reminder modes

  • The pager can be battery-powered, and the caregiver can put it in his pocket or by his side.
  • When the sensor is activited, the LED light indicator flashes and bell rang to remind the nursing staff

  • Package list:

  • Receiver *1
  • Sensor *1
  • AAA battery *3
  • AA battery *3
  • Micro USB * 1
  • Double-sided tape *1
  • Install the screw *2
  • English Manual*1

Multifunctional

alarm for officealarm for office

alarm for homealarm for home

doorbell for shopdoorbell for shop

LED mode for office or need a quiet environment

There will be no sound in the LED light reminder mode, and the LED light will flicker after the receiver receives the signal

Alarm mode for home safety

In the alarm mode, the rear buzzer can emit a 113dB alarm sound to scare off intruders

Doorbell mode for shops, restaurants, convenience stores and more

When the customer passes the induction zone, the receiver will send out greetings and welcome prompts