Feature

●Adjustable for a wide range: The track can adjust freely to suit many kinds of types screws, like M1.0 ?  M5.0  standard screw (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), special  screw, 1:1  short screw, filling piece screw and so on.
●Running smoothly. The screws movement and roll down inside the bucket, all the screws did not   enter the track will be cleared to enter the next circle, screws will not  be  stuck, the check point will not vibrate.
●Working speed adjustable Feeding system and drive system independent control, set the time delay  freely  to adjust the feed speed, suits many kinds of works.Automatic alarm function When non-normal condition occurs, the machine can automatic alarm.
●Simple operation Even novices can operate freely, whether metric specifications or british   specifications, all easily to understand.The volume is exquisite,  does not occupy the space.
●Can increase productivity  significantly It is unnecessary to target the screw cap, compared to screw plate, each  screw  can save 1.4 seconds, productivity increased by 4 times.


Description

Parameter:

1. Screw head:Suits each tape of screw(Lmax=20mm)

2. Output speed:2 screw/s

3. Input voltage:DC 12V/550mA

4. Product size:180*125*150(mm)L*W*H

5. Net weight:about 2.5kg

Operations:

1. Adjusts parameter suitable(The methods will be told next)

2. Open the lid,pours into groups the bolt for the material  room

3. Turn on the power button,put the electric  screwdrive head into guide  slot,down along the guide slot,pull out the  screw bolt go straight


Warning:

1.Thank you for purchasing this   product.The product is electrical automation equipment,please strictly abide by  the use of norms.Please read this manual before using the machine,and  keep it  safely.In case of any insurmountable problems,Please contact us

2.Use accessary adapter only