Feature

●Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance
●An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry.
●Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”
●The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well.
●Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed.

[1  & 4 x 3-1  & 4 (Pack of 100) Blue Blue]




[1  & 4 x 1-3  & 4 (Pack of 50) Bronze Bronze]




[1  & 4 x 1-3  & 4 (Pack of 10) White White]




[1  & 4 x 1-3  & 4 (Pack of 50) Ivory Ivory]




[3  & 16 x 3-1  & 4 (Pack of 100) Blue w  &  Bit Blue]




[1  & 4 x 2-1  & 4 (Pack of 20) Bronze Bronze]




[1  & 4 x 2-1  & 4 (Pack of 100) Bronze Bronze]





Description

Corrosion resistance and long lasting performance due to the EnviroSeal blue coating. Deep threads provide superior holding strength. Great for anchoring items to concrete, brick, block, or other masonry materials. The diamond tip allows for superior penetrating into hard materials. Ideal for solid concrete, brick, block or mortar joints. Length is measured from under the head. 3/16” requires a 1/4” driver. 1/4” requires a 5/16” driver. 5/32” hole for the 3/16” diameter. 3/16” hole for the 1/4” diameter. Building code approved ? MIAMI-Dade County. Taps threads in to base material. ACQ treated lumber rated. Fast and easy to use.