Feature

●【Premium Quality Metal Brass】：Made of SOLID BRASS, All Metal, non-plastic. Heavy duty, high quality, rust-proof. Exquisite and antique oil brush bronze finish resists corrosion and tarnish well, easy for daily clean and maintain.
●【360 ° Rotation Adjusting】：Use the lever to put the hand-held shower into the bracket, which is easy to adjust the angle. It can be adjusted downward to a maximum of 55 ° and fully rotated 360 °.
●【Widely Used】：Fits most handheld shower hose for shower hose bottom diameter between 0.75inch-0.78inch(19mm-22mm). (NOTE: Waterpik Brand Handheld Shower or Hose doesn’t work for this shower head wall holder).
●【Very Firm＆No Drilling】：Equipped with strong glue, firmly adhere to the wall without drilling. After proper installation, the duration is longer than that of the suction cup or adhesive. Please refer to the correct glue installation instructions attached to the package.
●【About Services】：If you have any quality or installation problems, please contact "YDmeet" at the first time, and we will provide you with professional service and warranty.

[Oil Rubbed Bronze]





Description

shower head holdershower head holder

YDmeet - Oil Rubbed Bronze Handheld Shower Head Holder

Oil Rubbed Bronze and high quality brass metal materials, the shower head bracket perfectly matches your bathroom accessories and makes your bathroom look more noble.

  • This shower head bracket ball head can be rotated 360°, which is a unique design, unlike the shower head brackets on the market that can only be rotated up and down. So we have to tighten the ball head to prevent the hand shower from falling off during use.
  • if it can be easily turned by hand, once installed, the ball head cannot bear the weight of the hand shower at all and will sag all the time.
  • Install with glue. After the glue is dry, it will be very strong. At this time, using the lever action of the hand shower, it will be easy to rotate, and you can keep the hand shower fixed in the position you want without drooping all the time.

  1. Install with Super Glue--After our many tests, the glue can fully support the weight of the shower head bracket and hang it on the wall sturdy. Please install it correctly according to the manual.
  2. Chrome polished and high quality brass metal materials, the shower head bracket perfectly matches your bathroom accessories and makes your bathroom look more noble.

Product Specifications

shower head holdershower head holder

hand shower holderhand shower holder

shower head holder-0628-14shower head holder-0628-14

Advanced Material

Metal brass material, no plastic; sturdy; high quality and durable to use.

Oil rubbed bronze; corrosion and tarnish resistant; waterproof; anti-oxidation.

Easy to clean and maintain.

After installation, you can adjust the angle freely and keep your angle, it will never come loose.

Adjustable and rotatable

Adjustable:

Use a flat-blade wrench to peel the holder from a sturdy wall and reinstall it elsewhere.

Can be rotated:

The sturdy ball head supports 360° up, down, left and right adjustment, and can be adjusted to a range of 55°.

Suitable size

A square modern and elegant look in polished gold for modern bathroom fixtures.

shower head holdershower head holder

Our showerhead holders are for firm, smooth walls and allow for a slight texture to the walls.

Not suitable for severely uneven, ash plastered plaster walls.

Inside diameter of the card slot and bottom diameter of the hose.

shower head holdershower head holder

  1. This didnt fit hexagon shaped connector on shower hose. So make sure yours is round or it wont hold it.
  2. The shower head holder is better design, its card slot is tapered. Holder Top Diameter: 0.9. Holder Bottom Diameter: 0.79.
  3. Fits 19mm to 22mm universal shower hose, not fits for shower hoses larger than 23mm.

Note:

1. The Waterpik Massages Handheld Shower Head will not fit this mount.

2. Make sure your shower hose threaded end will fit before buying.

Adhesive glue installation method

shower head holder-0628-7shower head holder-0628-7

shower head holder-0628-8shower head holder-0628-8

shower head holdershower head holder

Step 1

Apply an appropriate amount of glue to the bottom edge. (Too little glue will not stick firmly, too much will overflow)

Note:

1. Cannot be applied to the center of the bracket and groove;

2. The side groove design makes it easy to remove the bracket, but it is not recommended to remove it on fragile surfaces.

Step 2

Please use the auxiliary adhesive to help fix the shower holder and dry for 48 hours before use.

NOTE

About nail-free glue note, please follow the installation manual when installing.

1 shower head with handheld shower shower head with handheld shower rainfall showed head with handheld shower head with extension arm shower head holder
Rainfall Shower Head Combo Rainfall Shower Head Combo Rainfall Shower Head Combo Rainfall Shower Head Combo Rainfall Shower Head with Extension Arm Shower Head Holder
Material Brass+Stainless Steel+ABS Plastic Brass+Stainless Steel+ABS Plastic Brass+Stainless Steel+ABS Plastic Brass+Stainless Steel+ABS Plastic Brass+Stainless Steel Brass
Feature 3-Way Shower Diverter 3-Way Shower Diverter 3-Way Shower Diverter 3-Way Shower Diverter Adjustable Height ＆ Angle 360° Swivel
Shower Head 10” ABS Plastic 10” ABS Plastic 10” Stainless Steel 10” Stainless Steel 10” Stainless Steel /
Extension Arm 12” All Metal 12” All Metal 12” All Metal 12” All Metal 12” All Metal /