Feature

●Bi-metal type, M42 grade, 93" long, 1/2" wide, 0.025" thick, 14/18TPI
●Perfect for cutting soft ferrous metal only
●14/18TPI is suitable for cutting tube and profile, do not cut any non-ferrous metal like aluminum etc.
●14/18 TPI is variable teeth profile, teeth are small
●Suits all bandsaws which use 93" long, 1/2" wide bandsaw blade

[6TPI]




[18TPI]




[8  & 12TPI]





Description

Imachinist New Bandsaw Blade 93" X 1/2" X 0.025" X 14/18tpi

Blade Length: 93" or 79"

Blade Width: 1/2" or 13 mm

Blade Thickness: 0.025" or 0.65 mm

Blade Teeth: 14/18tpi (variable pitch)

Teeth Form: null raker

Include: 1 piece of 93" x 1/2" x 0.025" x 14/18tpi band saw blade

Suitable: for ferrous thin tubing, sheet, plate, profile etc

93 1 2 in 7 feet 9 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 2362 93 1 2 in 7 feet 9 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 2362 93 1 2 in 7 feet 9 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 2362 93 1 2 in 7 feet 9 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 2362 93 1 2 in 7 feet 9 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 2362 93 1 2 in 93 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 2362
Click here for 93", 6TPI Click here for 93", 6/10TPI Click here for 93", 8/12TPI Click here for 93", 10/14TPI Click here for 93", 12/16TPI Click here for 93", 24TPI
Blade Length 93 Inch 93 Inch 93 Inch 93 Inch 93 Inch 93 Inch
Blade Width 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch
Blade Thickness 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch
Blade Teeth 6TPI 6/10TPI 8/12TPI 10/14TPI 12/16TPI 24TPI
Pitch constant pitch variable pitch variable pitch variable pitch variable pitch constant pitch
Suitable for ferrous solid rod with small diameter aluminum, copper, brass etc and other non-ferrous metal ferrous thick tubing, profile, sheet, plate etc ferrous thick tubing, profile, sheet, plate etc ferrous thin tubing, sheet, plate, profile etc ferrous thin tubing, plate, sheet etc, dont cut non-ferrous metal, like aluminum etc
SKU S93126 S9312610 S9312812 S931201014 S93121216 S931224
64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Cold Rolling

We use imported cold rolling machine to cold roll the band saw blade strip

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Cold Rolling

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Milling

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Heat Treatment

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Welding

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

How to Improve Life

  • Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.
  • Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.
  • Running-in is required when blade cuts metal for the first time. Its important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.
  • Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.
  • Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.
  • Teeth selection is also important, here are our experience:

  1. big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;
  2. big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;
  3. big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;
  4. middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;
  5. small constant teeth (14TPI) is for general purpose;
  6. small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;
  7. small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, dont cut non-ferrous metal, like aluminum etc.