Feature

●Product of McDermott
●McMagic Micro Burnishing Papers - Washable reusable shaft conditioning system for smoothing shaft
●Ultra-Glide Shaft Conditioner - Seals wood pores in the shaft, eliminates built up dirt, moisture and oils, promotes optimal feel for a more controlled stroke
●Renew Shaft Cleaner - Eliminates drag due to dirt and oils on the shaft surface. Improves your stroke, quick and easy to use to make your shaft and ferrule look and feel like new
●Leather Pad Shaft Conditioner - For smoothing and polishing shaft


Description

Instructions of Use : McMagic Micro Burnishing Paper - Cradle the sheet of sand paper around the shaft and stroke using a circular twisting motion. Avoid creating excess heat through friction. Proceed by using the finer grit sheets until the effect of the previous sheet is eliminated. Ultra-Glide Shaft Conditioner - Apply several drops to a clean dry cloth. Apply evenly on shaft. Buff for 30 seconds. Recommended to use after McMagic Micro Burnishing Papers. Renew Shaft Cleaner - Sprinkle Shaft Cleaner on a clean, damp cloth. Wipe down cue shaft. Repeat if necessary. Wipe off residue with clean, damp cloth. Use Renew Shaft Cleaner before McMagic Micro Burnishing Papers. Then use Ultra-Glide Shaft Conditioner to seal and polish the shaft. Leather Pad Shaft Conditioner - Cradle leather pad shaft conditioner around the shaft and stroke using a circular twisting motion. Avoid creating excess heat through friction.