Feature

●This Tungsten Carbide Tipped hole saw made from high quality TCT Carbide,carbide tooth with high hardness and good wear resistance.,with detachable M2 Titanium-Plated Pilot center drill bit ,higher hardness, better positioning, and no rust,its hard to break.an excellent alternative to traditional Bi-Metal Hole saws.
●Quick cutting, more precise, smooth,longer service life cuts up to 1~25mm thick material like stainless steel, high alloy steel, aluminum, castings, section steel, iron, copper and other hard alloys. plastic,wood, FRP and PVC.Note: Cannot be used for concrete, tiles and stone.
●This TCT hole Saw teeth designed with Three-blade,with outer blade, middle blade, inner blade, small incision resistance and no burrs during drilling. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.ideal for cutting hard metals
●T.C.T. cutters widely used for electrical construction, transit work and general metal fabrication.Suitable for installation in drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on.
●The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.Remember to add coolant during continuous high-speed drilling.

[1-31  & 32  (50mm)]




[25  & 32  (20mm)]




[1-3  & 16  (30mm)]




[2-3  & 32  (53mm)]




[7  & 8  (22mm)]




[1-3  & 8  (35mm)]




[2-3  & 16  (55mm)]




[1-1  & 8  (28mm)]





Description

Tips:

1. Please check the integrity of the hole drill before use.

2. When the hole drill is installed in the electric drill, the three sides of the corresponding handle should be clamped.

3. When drilling holes, keep the verticality of the hole drill and the workpiece.

4. Use a small feed force when starting drilling, and use a medium feed force after positioning.

5. During drilling operation, the speed should not be too low to avoid jamming of the knife edge and causing broken knife.

6. When the center drill drills through the workpiece, the force should not be too large to avoid severe impact between the blade and the workpiece.

7. After the hole drill drills through the workpiece, the workpiece should be withdrawn while the hole drill is rotating.

Specification:

Material: TCT Carbide；

Cutting Length: 1Inch; Shank Dia.: 2/5 Inch(10mm)

Cutting diameter：

9/16"(14mm) 

5/8"(16mm) 

23/32"(18mm)

3/4"(19mm)

25/32"(20mm)

7/8"(22mm) 

1"(25mm)

1-1/8"(28mm)

1-3/16"(30mm)

1-3/8"(35mm) 

1-25/32"(45mm)

1-31/32"(50mm)

2-3/32"(53mm)

2-3/16"(55mm)

2-3/8"(60mm) 

2-9/16"(65mm)

2-3/4"(70mm)

3-11/32"(85mm)

3-9/16"(90mm)

3-15/16"(100mm)

Package Include:

1 x TCT hole saw (Please choose the size you need)

1 x M2 Titanium-plated center drill pilot drill bit

1 x spring

1 x L Allen wrench