Feature

●🔐【Main Function】The MST-101 detector is using advanced technology from Germany, it can collect and analyze signals under non-dismantle automotive electrical parts. Testing results are showed by LED indicator and beeper.
●🔐【Easily Diagnose】Easy to know if there is faults of the automotive electronic parts. The beeping of the MST-101 is an indication that the component being tested is normal and not damaged or shorted or disconnected, conversely, no beeping during testing is an indication that the component is bad.
●🔐【Test Range】 Lgnition Coil(traditional coil,double spark coil,single spark coil) generator, fan,electric-magnetic valves,emission gas controlling value, fuel injectors,relay.etc.
●🔐【Car Manufacturer Warnings】1. To make Pen power signal detector test components, there will be a clignote LED and corresponding spoken language if park run very well; 2. With 2 different detectors on high sensitivity test can be power lines; 3. About a detector Pen line antenna to specific test results; 4. There are about detector Pen model overturned.Used for normal test, are being used to strong magnetic field test.
●🔐【High Quality】 Made of high-quality aluminum material for durability and high quality. The package has the 2*1.5V AAA Battery.


Description

1212

The MST-101 detector is using advanced technology from Germany, it can collect and analyze signals under non-dismantle automotive electrical parts, Testing results are showed by LED indicator and beeper. Easy to know if there is faults of the automotive electronic parts.

Variety of Detection

22

33

33

Coil (according to the traditional coil, double dingle, according to the coil), coil.

Generators, within the United Nations, combining the fan motor (heating and cooling water valve).

MAITRISER valve, injector, according to the plug-in fuel, power, sensor transfer effect lobby.

Operation Tips

11

22

33

44

How

Press the button to push it out and it will come out.

to

Find the correct position of the positive and negative battery terminals.

Use

After the battery is installed, cover well and then push the button up to open.

MST-101

Turn on and press the blue button to find the fault point.

Ignition Coil Test & Generator Test

66

88

99

00

Ignition Coil - Not Work

When the ignition coil is not working or damaged,status indicator LED1 and LED2 off,the beeper has no sound.

Ignition Coil - Work

When the ignition coil is working,status indicator LED1 and LED2 is flashing,the beeper is making sound continuely.

Generator - Not Work

When the generator is not working or damaged,status indicator LED1 and LED2 off,the beeper is not making sound.

Generator - Work

When the generator is working,status indicator LED1 and LED2 is flashing,the beeper is making sound continuely.

0000

Safe Operations

  • The car to be tested should park at an area with good air condition,cant suck into exhaust emission from engine
  • The car to be tested should be far away from smoke and fire source;The gasoline engine and chargeable battery is possible to occur explosive air,so its very necessory to prepare fire extinguish gears accordingly
  • During test process,its necessory to avoid the moving parts and heat source to protect tester and testing equipments
  • To be far away from the cooling fan of engine
  • Dont put other equipments on the battery which is possible to make the battery inside to be Short,which may cause hurt or damage of tester and equipments
  • Do to turn off the ignition switch before connecting or remove electrical parts
  • Dont leave the car during the test
  • Pls confirm the gear position of the car: automatic is at P;manual is at blank;Do push tight of manual brake;put blocks before the driving tyres
  • Pls read relative warnings from car manufacturer,pay attention to the important warning information

11