Feature

●Package Includes: (1) Pair of RockvilIe RKL80MW 8" 900 Watt White 2-Way Marine Boat Speakers w/LEDs. (1) RockvilIe DBM25 1400 Watt 2 Channel Marine/Boat Amplifier Amp w/Silicone Covers. (1)RockvilIe RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (1) RockvilIe RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote. Includes: Pair of 8" Marine LED Speakers. 16.4 feet of Speaker Wire. Stainless Steel Mounting Screws. Pair White Grills. Features:
●Pair RockvilIe RKL80MW 8 2-Way 900 Watt White Marine Boat Speakers with LED Lights. Power Rating: 450 Watts Peak /100 Watts RMS Per Speaker. Total Power Per Pair: 900 Watts Peak / 200 Watts RMS. Beat sync LEDs flash to the rhythm of the music. You can select either red or blue color LEDs on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire. The louder the music the more intense the LEDs flash. IP66 waterproof rating
●Fully Marinized Against Salt & Fresh Water Conditions. Sun Light Treated cone makes this completely Waterproof and rustproof. Anti-corrosion Stainless Steel Terminals. Molded ABS plastic for amazing sound and protection from the elements while out on the water. Polypropylene Formed Cone. 22 Oz Y30 magnet supports high power handling. Rubber Surround. High quality ferrite magnet. 1 inch PEI Tweeter. 8 Woofer with Oversized 1.2 CCAW Kapton Voice Coil
●Pre-installed Stainless-Steel mounting screws included. Perfect for Marine, Car, ATV and UTV applications. Impedance: 4-Ohm. Frequency Response: 40Hz - 20KHz. Sound Pressure Level: 89dB @ 1w/1m. Total Diameter: 8.07. Cutout Diameter: 6.89. Total Height: 4.84. Mounting Depth: 3.54. Perfect for marine, ATV, outdoor use. Whats In The Box: (1) DBM25 Amplifier. Birth sheet with Tested Power. Mounting Screws. Warranty Card. Owners Manual. Features:
●RockvilIe DBM25 1500 Watt Class-AB 2-Channel Marine Amplifier With Terminal Covers. CEA Compliant Power Ratings: 2 Ohm: 185 Watts x 2 Channel 4 Ohm: 125 Watts x 2 Channel 4 Ohm Bridged: 370 Watts x 1 Channel. 2 Ohm: 185 Watts x 2 Channel. 4 Ohm: 125 Watts x 2 Channel. 4 Ohm Bridged: 370 Watts x 1 Channel. RMS Power Ratings: 2 Ohm: 370 Watts x 2 Channel 4 Ohm: 250 Watts x 2 Channel 4 Ohm Bridged: 750 Watts x 1 Channel. 2 Ohm: 370 Watts x 2 Channel. 4 Ohm: 250 Watts x 2 Channel


Description

(2) Rockville RKL80MBW 8" 900w Marine LED Speakers+Receiver+Amplifier+Amp Kit

11

Package Includes:

  • (1) Pair of Rockville RKL80MW 8" 900 Watt White 2-Way Marine Boat Speakers w/LEDs
  • (1) Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
  • (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  • (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote

_________________________________________________________________________________________________________________________________________________________________

Features of RKL80MW:

  • Pair Rockville RKL80MW 8” 2-Way 900 Watt White Marine Boat Speakers with LED Lights
  • Power Rating: 450 Watts Peak /100 Watts RMS Per Speaker
  • Total Power Per Pair: 900 Watts Peak / 200 Watts RMS
  • Beat sync LED’s flash to the rhythm of the music
  • You can select either red or blue color LED’s on the wire harness
  • No extra installation for the LED. It gets a power signal through your speaker wire
  • The louder the music the more intense the LED’s flash
  • IP66 waterproof rating
  • Fully Marinized Against Salt & Fresh Water Conditions
  • UV treated cone makes this completely Waterproof and rustproof
  • Anti-corrosion Stainless Steel Terminals
  • Molded ABS plastic for amazing sound and protection from the elements while out on the water
  • Polypropylene Formed Cone
  • 22 Oz Y30 magnet supports high power handling
  • Rubber Surround
  • High quality ferrite magnet
  • 1” inch PEI Tweeter
  • 8” Woofer with Oversized 1.2” CCAW Kapton Voice Coil
  • Pre-installed Stainless-Steel mounting screws included
  • Perfect for Marine, Car, ATV and UTV applications
  • Impedance: 4-Ohm
  • Frequency Response: 40Hz - 20KHz
  • Sound Pressure Level: 89dB @ 1w/1m
  • Total Diameter: 8.07”
  • Cutout Diameter: 6.89”
  • Total Height: 4.84”
  • Mounting Depth: 3.54”
  • Perfect for marine, ATV, outdoor use

_________________________________________________________________________________________________________________________________________________________________

Features of DBM25:

  • Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)2 Ohm: 185 Watts x 2 Channel4 Ohm: 125 Watts x 2 Channel 4 Ohm Bridged: 370 Watts x 1 Channel
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)2 Ohm: 750 Watts x 2 Channel 4 Ohm: 500 Watts x 2 Channel 4 Ohm Bridged: 1500 Watts x 1 Channel
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Adjustable Low Pass Filter: 50 Hz - 250 Hz
  • Adjustable High Pass Filter: 60 Hz - 1.2 kHz
  • Fully Adjustable 12dB Bass Equalizer
  • Adjustable Input Level Control
  • Minimum THD at Rated Power: <0.05%
  • S/N Ratio: >90 dB
  • Frequency Response: 10 Hz - 50 kHz
  • Damping Factor: >100 @ 100Hz
  • (2) 25 Amp ATC Fuses
  • Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
  • Waterproof silicone covers for end panels
  • Rustproof Aluminum heat sink with white paintedfinish
  • Stainless steel end panels are rustproof
  • All screws and mounting hardware are stainless steel and rustproof
  • Bottom panel is aluminum and rustproof
  • High-Speed MOSFET Power Supply
  • Studio-Grade Bipolar Output Stage Transistors
  • Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
  • Product Weight: 7.7 Lbs

_________________________________________________________________________________________________________________________________________________________________

Features of RMWK4 V2:

  • Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
  • 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
  • 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
  • 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
  • 25’ Blue Remote Wire
  • (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 120A Mini-ANL Fuse
  • (1) 80A Mini-ANL Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (5) Speaker Cable Terminals
  • (1) Washer
  • (10) White Cable Ties

_________________________________________________________________________________________________________________________________________________________________

Features of RGHR2:

  • Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
  • Fits into a standard Gauge-Hole (Tachometer) Opening
  • Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
  • Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
  • IP66 Waterproof Certification (Tested to withstand the elements)
  • USB Input to play back audio files store on a USB thumb drive or any other USB device
  • RCA Aux Input
  • AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
  • Bluetooth built in to stream audio from any Bluetooth enabled device
  • USB Input Charges Your Phone
  • Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
  • Big easy to use buttons
  • Backlit LCD display
  • Wired Remote Control Included (normally 50)
  • Required cutout: 3.72" (diameter) x 2.75" (depth)
  • USB is 500mA and 5V and supports 16GB max

Dimensions:

  • 3.72” inch cutout mounting diameter
  • 4.45” inch diameter top plate
  • 2.75” mounting depth (not including top plate)
  • 3.91 inch depth included the top plate

Specs of the built in amplifier:

  • TDA7851L quadbridge power amplifier
  • 4 x 72 watts peak @ 2 ohm
  • 4 x 48 watts peak @ 4 ohms
  • 4 x 28 watts RMS @ 4 ohms
  • Highly efficient even when running at 2 ohms!
  • Low distortion even at top volumes

Looking for specific info?