Feature
●【HIGH QUALITY DRILL HOLE SAW】Construction of high quality High-speed 45# steel for rust proof, much more durable and can offer a up to 50% longer life; great heat resistance
●【DURABLE AND SAFETY】Nickel-plated with a diamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole
●【WIDE APPLICATION】 Versatile cutter that can be used in a wide variety of applications; Ideal for Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces
●【SIZE】: 1 x Diamond Drill Bits. Cutting Hole Diameter is 1-3/4" / 45mm, Shank Diameter is 3/8" / 9.8mm, Total Length is 2.18" / 55.4mm.
●【TIP】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication can extend drill bit life. Warnings: Not for use on Concrete or for depths beyond about 1/2"; Water is required for lubrication when drilling.
[32mm]
[45mm]
Description
Tile Hole Saw Diamond Drill Bits Glass Tile Hollow Core Extractor Remover Tools for Glass, Ceramics, Porcelain, Ceramic tile
Diamond Drill Bits, are also know as Diamond Core Drill Bits, Diamond Hole Saws or Bonded Diamond Drill Bits. They are often called Glass Drill or Tile Drill, but they are much more versatile since they are used to drill glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone, and fiberglass.
Main Features:
Hole Diameter: 1-3/4" / 45mm
Shank Diameter: 3/8" / 9.8mm
Total Length: 2.18" / 55.4mm
Removes a complete circle glass, tiles, marble, granite, ceramic or other material and only needs water for lubrication
Can be used with a standard electric drill (not included)
Easy to use, high quality, good performance, long life
Excellent for making clean and accurate hole on glass, tile and marble
【Attention】
Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life
How to Use:
1. Put glass drill into the driller.
2. Because this hole saw cannot locate the center, so please cutting with it slowly with 45 degrees.
3. Please cut a small mark first to locate the center, then you can cut the material vertically.
4. The speed needs to be controlled, not too fast and water is required during cutting.