Feature(may vary by option.)

●No Top Ring And Poles Included!!!! Safety Net (for 6 Curved Pole with Top Ring Enclosure System as picture showed). Fits max diameter 1 inch (2.5cm) pole of the top ring. Easy to fit and Install.
●Dual Closure entry with zipper and buckles: Entrance to the enclosure is via zip system with added buckles for maximum safety.
●High density mesh makes it more solid and durable,and fine weave to ensure little fingers cannot become trapped. 4mmx4mm UV resistant to protect it from high temperature.
●Height of the net: 6ft/183cm, Can prevent the kids jumpping outside of the trampoline.
●NOTE: Please confirm your Trampolines TYPE (6 Curved Pole with Top Ring Enclosure System as our picture showed), size and count the number of poles before ordering.

[14FT - 6 Poles]





Description

bannerbanner
ss

Trampoline Safe Net for Round Frames Using 6 Curved Pole with Top Ring

***Enclosure only, No pole and fixing included.***

  • Height of the net(sleeve) is about 183cm
  • Diameter of the sleeve is about 6cm
  • 4mm*4mm PE mesh up to 110g/m2
  • Security door with double clips and zip
  • Make up of 4mm x 4mm UV resistance PE mesh, Sturdier than other polyester net
  • Make from a tough weatherproof polyethylene
  • Bottom edge fixed features with elastic strap
  • It is able to give the maximum protection for children, teenagers or adults and we sincerly ensure its high performance for years to come.

Package: 1 * Safety Net ONLY

Size

  • 10ft for 6 poles
  • 14ft for 6 poles
  • 15ft for 6 poles

ss

ss

ss

Make sure your trampoline TYPE and you have measured the width of your trampoline properly before you buy.

Double closure with zipper and buckle provides perfect protection.

Bottom edge fixed features with elastic strap

SS

Measuring Tips to Help You Determine Your Trampoline Enclosure Replacement

  • Step 1: Confirm the type of your trampoline, measure the frame from one outside edge vertically and horizontally to the other outside edge so you get the correct measurements.
  • Step 2: Determine the number of poles or arches that the net will need to connect to.
  • Step 3: Based on the frame size and number and type of poles, see how this net will be installed on your trampoline. Our net is fitted by sliding the sleeves over the poles.

xx

How To Install Net

(1)Use a wrench to unscrew the top ring pole connectors.

(2)Slide each top ring fiber glass through the net sleeves on the top of net,until the top rings are fully though all of the net sleeves.

(3)Connect the top ring fiber glass poles together by screwing on the connector.Install screw on the underside of connector.

(4)Install the top ring into the enclosure pole cap and lock into correct place.

(5)Thread the rope through the hole on bottom of the net and back into the next V-ring,continue until reaching the

end of the rope.Tie off into a knot

nei 8nei 8

Product information