Feature

●BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
●Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
●This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
●6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
●CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging

Description