Feature

●[TP542] 13dBi Panel Antenna / High-Gain / Long-Range / Dual-Band / Outdoor / Directional / N-Female connector
●[WIRELESS] designed to collects the signal and increase reception from a remote location or bridge WiFi networks between two points or objects that are far apart
●[DUAL-BAND 2.4Ghz and 5Ghz] eliminates the need to purchase different antennas for each frequency range and single antenna can be used for both frequencies.
●[DIRECTIONAL] focus the signal in one direction to increase reception leading to greater gain figures.
●[OUTDOOR] compact, light-weight, rugged weatherproof housing and corrosion-resistant materials for outside pole mount (mounting hardware included; mounting pole not included)


Description

Tupavco TP542 WiFi Directional Panel AntennaTupavco TP542 WiFi Directional Panel Antenna

TP542 13dBi WiFi High-Gain Panel Antenna

Panel antenna is used to radiate the signal into the forward space. The primary purpose is to reach places where a device with a default antenna would not reach. It is designed for use on stationary objects such as buildings or houses, but it is widely used for remote connection at campgrounds, RV motorhomes, boats, or remote devices like WiFi cameras.

Antenna collects the signal and sends it through the cable to a networking device. It is equipped with an N-Female connector and it is ready to connect to a device with a proper extension cable. It requires a 50 Ohm RF coax expansion cable with N-Male connector on the antenna side and connector type that fits the device on the other side. As a rule of thumb, always use the shortest line and thickest cable to avoid signal loss. Do not use RG59/RG6 coax (75 Ohm TV cable) – signal will be seriously degraded.

Dual Band - Covers 2.4 and 5 GHz frequency rangeDual Band - Covers 2.4 and 5 GHz frequency range

Dual-Band covers both 2.4GHz and 5GHz frequency spectrum.

Dual-band or multi-frequencies equipment is capable of transmitting a signal in either of two different standard frequency ranges. The primary differences between the 2.4 GHz and 5GHz wireless frequencies are range and bandwidth; while the 5GHz range provides faster data rates but at a shorter distance, 2.4GHz offers coverage for further distances but may perform at slower speeds. The router or access point device needs to have a detachable external antenna connector that supports both ranges in a single antenna.

TP 542 AntennaTP 542 Antenna

Directional Long Range Point-To-Point

This directional antenna is designed for point to point directional wireless applications. To maximize the benefits of this antenna type, point the signal beam to a remote WiFi node. It provides the most focused 13dBi signal in a narrow beamwidth of ~40° horizontally and ~35° vertically.

The distance this antenna can reach may vary based on obstacles on the antenna path to the remote WiFi node like walls, trees, and other objects. The best signal gain is when a “direct line of sight” between the antenna and the remote location is possible.

Gain: 13 dBi • Frequency: 2400-2500/5150-5850 MHz • VSWR: <2.0:1 • Polarization: Vertical • Horizontal Beamwidth: 2.4GHz-40° 5GHz-41° • Vertical Beamwidth: 2.4GHz-35° 5GHz-33° • Nominal Impedance: 50 Ohms • F/B Ratio: >20 dB • Max Input Power: 100W

TP 542 PARTS INCLUDEDTP 542 PARTS INCLUDED

TP 542 ANTENNATP 542 ANTENNA
Mechanical Data
  • Connector : N Female
  • Dimension: 5.52x4.73x1.58 inch
  • Weight: 1.32lb
  • Reflector Material: Aluminum Alloy
  • Radome Material: Weatherproof ABS
  • Mast Size: Ø30-Ø50mm (not included)
  • Rated Wind Velocity: 210km/h • Operating
  • Operating temperature: -40~+65℃

INSTALLATION

Parts included: mounting bracket, U-bolt, washers and screws

1. Remove plastic protectors from screws on the back of antenna.

2. Attach the mounting bracket on those screws and secure with washers and screws nuts.

3. Insert U-bolt around .5” to 2” pole, put the mounting plate from opposite side, and now ends of U-bolt through mounting bracket and secure with washers and screw nuts.

  • Use 50 Ohm RF coax cables
  • Keep cables as short as possible
Tupavco AntennasTupavco Antennas

From the brand

Previous page
  2. Tupavco LogoTupavco Logo

    Tupavco was started more than a decade ago to make shopping for network equipment easier and more affordable. Our goal is to provide customers with the best networking equipment possible, and to make the shopping experience easy and enjoyable.

    We work around the clock to provide products our buyers can rely on, and to resolve any issues with our products. We try to not just provide networking equipment - but a connection!

  3. How did we get our start?

    We got started selling electronics out of our small apartment, trying to make a name for our brand over 10 years ago on Amazon. Tupavco has since expanded to a refined operation with many specialists that help you have the best shopping experience possible for networking equipment.

    What makes our products unique?

    Many of our products have extra features or compatibilities that help them stand out, and as enthusiasts for electronic equipment ourselves, we know what you need and make sure to deliver you the piece of equipment that will complete or improve your setup.

  4. Ethernet surge protectorEthernet surge protector
    Panel antennaPanel antenna
    Ethernet extenderEthernet extender
    Rack mount fanRack mount fan

    Featured Tupavco Products

Next page

Whats in the box

  • U-Bolt (2)
  • Screws (4)
  • Washers (8)

    • Product information