Feature
●▲【Package Includes】 Hole saw kit includes 20pcs woodworking tools. 14pcs saw blades: 19mm(3/4"), 22mm(7/8"), 25mm(1"), 29mm(1-1/8"), 32mm(1-1/4"), 35mm(1-3/8"), 38mm(1-1/2"), 44mm(1-3/4"), 51mm(2"), 64mm(2-1/2"), 76mm(3"), 89mm(3-1/2"), 102mm(4"), 127mm(5") with 1" (25mm) cutting depth, 2pcs mandrels, 1pc installation plate, 1pc hex key and 1 elaborate package box.
●▲【Professional Quality】 The hole saws made of heat treated and blackening treated carbon steel with oil and rust proof function, boasts advantages of high-performance, rust protection and durable hole cutter.
●▲【Wide Application Scenarios】Upgraded design with ultra sharp serrations for faster and cleaner cutting saw set, which is ideal for softwood, plastic plate, plasterboard and thin PVC board.
●▲【Solid Storage Case】The hole saw kit for wood comes with a customized heavy duty case for portability. Designated slots in the case keep every piece in place. This holesaw kit improve work efficiency.
●▲【Please Note】Can be used with a standard electric drill, impact drill, If you need very precise holes, please use a saw machine, not suit for hard metal, hard wood or density board. Not for use for cutting depths beyond about 1"(25mm).
Description
JELLAS - Designed Tools Seed New Stories
Jellas Hole Saw Kit
Jellas hole saws are used to cut perfectly round holes in a wide variety of materials. Because they only cut out the perimeter line of the hole, they are much more efficient than a spade drill or twist drill. Besides they can be used in conjunction with corded drills, cordless drills (of 18 volts or higher), drill presses, and even lathes, provided they have a 3/8 or 1/2 inch chuck.
How to Assemble the Hole Saw Kit?
- Insert drill bits to mandrel, and fasten the screws on the side of mandrel with hex key.
- Insert mandrel through bottom to top of saw blade.
- Put the installation plate on the saw, and then screw the nut to lock the installation plate and prevent them from being damaged(The the installation plate should between saw blade and nut). The gasket cannot be installed in reverse.
- Please ensure you have fastened the screws tightly on the side of mandrel with hex key and no wobble to ensure precise cutting.
- When you use saw blades ≥44 mm(1-3/4"), must use installation plate together.
- Its recommend using machines with Drilling speed: RPM ≤1000, which can prolong the life of the hole saw.
Jellas Hole saw kit includes
- 2pcs mandrels
- 2pcs drill bits
- 1pc installation plate
- 1pc hex key
- 14pcs saw blades, 19mm(3/4")； 22mm(7/8")； 25mm（1"）； 28mm(1-1/8")； 32mm(1-1/4")； 38mm(1-1/2")； 44mm(1-3/4")； 51mm(2")； 60mm； 67mm； 76mm(3")； 89mm(3-1/2")； 102mm(4")； 127mm(5")
- With 1" (25mm) cutting depth.
- Please make sure the Drilling speed: RPM<1000.
- No matter your drill is cordless/ corded drills, impact drills, and bench drills, size of 3/8” or 1/2”, they can both work well with.
Jellas hole saw kit is ideal for softwood, plastic plate, plasterboard and thin PVC board, not suitable for hard metal, hard wood or density board.
Scenarios in use
- Jellas Hole saws are often used to make holes in doors for installing hardware such as dead bolts and lock sets.
- Jellas Hole saws can also be used to cut out holes in ceilings prior to the installation of light fixtures and fittings.
- Jellas hole saw can be used to quickly cut an accurately sized hole with minimal effort for a hole for a drainage or waste pipe
- Jellas Hole saws are ideal for making extra connections in pre-existing pipework and plumbing.
- Electricians often use Jellas hole saws to cut access points for cables and wiring.
- Perhaps you are sprucing up the garden by adding a birdhouse or two to attract some wildlife. Jellas hole saw will make short work of that little entrance hole.