Feature
●Cutting capacity (AWG) : Stainless 16 / Soft Iron 13 / Copper 10 / Brass 12 /Stranded copper wire 14
●w/ spring and stripping hole (φ1.5mm)
●Made in Japan
[6-Inch]
[8-Inch]
[5-Inch w & Spring]
[6-Inch w & Spring]
[5-Inch]
Description
|
|
|
|
|---|---|---|
FORGINGOur manufacturing starts by heating raw metal to over 1,000deg and shape it between two dies on forging hammer by impact force. This Forging process provides desired shape and also benefits of aligning the grain flow to obtain hardness & strength. |
HEAT TREATMENTAfter forging and some machining, pliers enter heat treatment processes. During heating & cooling processes within this stage, metal properties improve or change on strength, hardness, ductility, elasticity or wear resistance etc. Our pliers are heated and cooled under tight controls and get extra induction hardening on cutting area to obtain ideal balance of these properties on its each part for superior durability. |
SHARPENINGHeat Treated pliers in best condition are polished and assembled to proceed to sharpening, which is the most important process determining its cutting performance. Our pliers are sharpened piece by piece by experienced artisans hand-work. Its adjusted even slight deformation caused on heat treatment process and pliers obtain best cutting performance with optimal edge thickness and angle for each purpose. |
TSUNODA Long Nose Pliers
- Heat treated durable forged steel
- Serrated jaws for secure grip
- Flush rivet to reach target in narrow area
- Non-slip handles
- Made in Japan
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Long Nose Pliers 5-inch | Long Nose Pliers 5-inch w/Spring | Long Nose Pliers 6-inch | Long Nose Pliers 6-inch w/Spring | Multi Purpose Long Nose Pliers 6-inch | Bent Nose Pliers 6-inch | |
| Model | RP-125 | RP-125SH | RP-150 | RP-150SH | KRP-150 | FR-150 |
| Length | 5-inch | 5-inch | 6-inch | 6-inch | 6-inch | 6-inch |
| Stripping Hole | 1.5mm (0.6 inch) | 1.5mm (0.6 inch) | 1.5mm (0.6 inch) | |||
| Cutting Cap. (Steinless) | dia. 1.2mm (AWG 17) | dia. 1.2mm (AWG 17) | dia. 1.6mm (AWG 14) | dia. 1.6mm (AWG 14) | dia. 1.6mm (AWG 14) | dia. 1.6mm (AWG 14) |
| Cutting Cap. (Soft-iron) | dia. 1.8mm (AWG 13) | dia. 1.8mm (AWG 13) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) |
| Cutting Cap. (Copper) | dia. 2.6mm (AWG 10) | dia. 2.6mm (AWG 10) | dia. 2.6mm (AWG 10) | dia. 2.6mm (AWG 10) | dia. 2.6mm (AWG 10) | dia. 2.6mm (AWG 10) |
| Cutting Cap. (Brass) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) | dia. 2.0mm (AWG 12) |
| Cutting Cap. (Stranded cable) | 2.0 sq | 2.0 sq | 5.5 sq | 5.5 sq | 5.5 sq | 5.5 sq |
| Spring | ? | ? |
|
|
|
|
|
|---|---|---|---|---|
| Long Nose Pliers 8-inch | Duck Bill Pliers 8-inch | Long Needle Nose Pliers 11-inch (Straight-type) | Long Needle Nose Pliers 11-inch (Bent-type) | |
| Model | RP-200 | DBP-200 | LRP-280 | LRP-280B |
| Length | 8-inch | 8-inch | 11-inch | 11-inch |
| Stripping Hole | ||||
| Cutting Cap. (Steinless) | dia. 2.0mm (AWG 12) | |||
| Cutting Cap. (Soft-iron) | dia. 2.6mm (AWG 10) | |||
| Cutting Cap. (Copper) | dia. 3.2mm (AWG 8) | |||
| Cutting Cap. (Brass) | dia. 2.6mm (AWG 10) | |||
| Cutting Cap. (Stranded cable) | 8.0 sq | |||
| Spring |