Product Specification:
T Type Hand Ratchet Tap Wrench
Material: Stainless alloy steel.
Length of tap holder: 85mm/3.35’’.
Diameter of tap holder: 20mm/0.79’’.
Size of metric tread tap: M3-M8.
Length of tread tap: 40mm/1.57’’, 50mm/1.97’’, 56mm/2.2’’, 59mm/2.32’’, and 62mm/2.44’’.
Weigh: 205g.
Screw type: Coarse thread.
Product character: Chromium plating and polishing on the surface, T type design, beautiful appearance,
compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and easy to operate in a narrow space.
Widely use: It is used for hand tapping taps, adjustable forward and reverse, ratchet rotation, compact and
convenient, widely used in industry and life, plays a great role.
Tap Wrench operate main point:
1.The hole should be chamfered chamfer first .
2.The tread tap used for the chuck assembly must be correct.
3. Tap to vertical alignment operation .
4.Level cut into rotation 2-3 times.
5. Correctly check whether it is vertical after cutting in.
6. After tapping 3/4 turn, it should turn 1/4 back feeling.
7. The tap should be reversed pull out after work.
8. Use oil when cutting metal.
Tips:
First install the power lever, which can be reversed in right-handed tapping or left-handed tapping,
saving time and effort. Then rotate counterclockwise to release the chuck and adjust it to fit in the tread tap.
Be careful not to over-relax and loosen, which may cause the internal spring of the product to fall off.
After inserting the tap, tighten the chuck clockwise and then set the toggle switch to the middle position to lock.
Tighten the collet and use it, replacing different types of taps according to tolerance of the wrench.
Package including:
1 x T-Handle Ratchet Tap Wrench
5 x Hand Screw Tap