Feature

●★ Thread Tap Size --- Thread size: M1.6 x 0.35 (right hand); square shank width: 1.7mm / 0.07"; thread length: 8.7mm / 0.34"; overall length: 40mm / 1.57"; accuracy: H2; flutes quantity: 3 flutes.
●★ Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic.
●★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping.
●★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications.
●★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable.

[M5 x 0.8]




[M2 x 0.4]




[M1.6 x 0.35]




[M3 x 0.5]




[M2.5 x 0.45]




[M4 x 0.7]




[M6 x 1]





Description

taps & diestaps & dies

Taps & Dies for Thread Tapping. Meet Your Needs for Thread Repair.

Instructions for Use of Taps

Control speed based on material hardness. Feed rate (recommended): ordinary steel (copper aluminium alloy): 6-15m/min; hard steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

The higher the hardness, the slower the speed. Fast speed and low torque; slow speed and high torque. When tapping plastic, add lubricating coolant. For steel, motor oil is generally used, and vegetable oil is used for high requirements. Use No. 30 motor oil for stainless steel.

taptap

Wide Applications

Suitable for threading through holes or shallow holes. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, hard plastic.

taptap

taptap
Universal Square End Shank
  • Tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm).
  • Drill holes with a twist drill before tapping. The tapping angle should be 90 degrees vertical and stable.

Screw Threading Tap

straight flutes design, rapid downward chip removal

The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications.

  • Machine taps are used in tapping machines, vertical drilling and milling machines.
  • M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches.
  • Add appropriate tapping oil for higher quality internal threads and more durable taps.
tap tap tap tap tap die
Straight Flute Tap Straight Flute Tap Straight Flute Tap Spiral Point Tap Spiral Point Tap Round Die
Thread Size 2#-56 UNC M4 x 0.7 8#-32 UNC M4 x 0.7 M6 x 1.0 5/8-24 UNEF
Finish Uncoated Uncoated Uncoated Titanium Coated TICN Coated Uncoated

Product information