Feature
●IAG FULL LENGTH EZ-STEP MAKES GETTING IN & OUT EASY - Stepping in and out of the new Ford Bronco can be a bit of a challenge for some, especially if the vehicle has been lifted. Whether you or one of your family members need a little boost, the IAG EZ-Step System provides just the solution to make getting in and out easy. The EZ-Step Full Length Bronco Side Step System is designed to mount to the OEM Ford rock rails found on many 2021 and 2022 Bronco models. The full-length design matches the length of the OEM rock rail and provides a wider section for rear passenger entry.
●EASY, 15 MINUTE INSTALLATION - Our unique pinch clamping system allows the EZ-Step to install virtually anywhere along the rock rail, enabling you to find the perfect location for entering or exiting the vehicle. The simple two-bolt installation takes a few minutes and does not require drilling or cutting. The steps are easily removable trailside for more serious off-roading. The clamping system includes foam pads that protect the OEM rock rail from finish damage during mounting.
●MADE IN THE USA - Were proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in performance products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based, support staff is also here to help with any installation questions you might have.
●SITS 2" BELOW THE TOP OF THE OEM ROCK RAIL - The Full Length EZ-Step is located approximately two inches below the top of the OEM rock rail. This location allows easy access to the vehicle while still maintaining good ground clearance. OEM Rock Rails (not included) are required for installation. With this mounting location the step height is lowered by approximately seven inches from the door sill opening. The added foothold prevents the need to step on the painted door sills or to slide across the seats. The textured black powder coat on the EZ-Step prevents slippage and adds a unique look to the exterior of the vehicle.
●YOUR CHOICE OF ACCENT COLOR - The EZ-Steps are TIG welded and feature high-strength mandrel-bent tubing with four 3/16” thick brackets and ⅛” thick steel top plate. The EZ-Step is finished in an attractive, black anti-skid powder coat finish for durability and safety. The Bronco side steps feature the ability to customize the look by choosing one of our IAG logo plates in either Black, Blue, Orange, Red, or Stainless finish to match your Bronco and add a stylish touch.
[Two Door Orange]
[Four Door Red]
Description
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| IAG V1 EZ-Step | IAG V2 EZ-Step | IAG V2 Full Length EZ-Step | IAG V2 Full Length EZ-Step | IAG I-Line Full Length Step | IAG I-Line Small Side Steps | |
| Compatibility: | Requires OEM rockrail (sits even) | Requires OEM rockrail (sits 2" below) | Requires OEM rockrail (sits 2" below) | Requires OEM rockrail (sits 2" below) | Does NOT require OEM rockrail | Does NOT require OEM rockrail |
| Colors: | Black, Orange, Blue, Red, Stainless | Black, Orange, Blue, Red, Stainless | Black, Orange, Blue, Red, Stainless | Black, Orange, Blue, Red, Stainless | Black | Black, Orange, Blue, Red, Stainless |
| Doors: | 2 and 4 Doors | 2 and 4 Doors | 2 Door | 4 Door | 4 Door | 2 and 4 Doors |
EZ-STEP MAKES GETTING IN & OUT EASY
Stepping in and out of the new Ford Bronco can be a bit of a challenge for some, especially if the vehicle has been lifted. Whether you or one of your family members need a little boost, the IAG EZ-Step System provides just the solution to make getting in and out easy. The EZ-Step Full Length Bronco Side Step System is designed to mount to the OEM Ford rock rails found on many 2021 and 2022 Bronco models. The full-length design matches the length of the OEM rock rail and provides a wider section for rear passenger entry.
SITS 2" BELOW THE TOP OF THE OEM ROCK RAIL
The Full Length EZ-Step is located approximately two inches below the top of the OEM rock rail. This location allows easy access to the vehicle while still maintaining good ground clearance. OEM Rock Rails (not included) are required for installation. With this mounting location the step height is lowered by approximately seven inches from the door sill opening. The added foothold prevents the need to step on the painted door sills or to slide across the seats. The textured black powder coat on the EZ-Step prevents slippage and adds a unique look to the exterior of the vehicle.
MADE IN THE USA
Were proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in performance car products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based, support staff is also here to help with any installation questions you might have.
EASY, 15 MINUTE INSTALLATION
Our unique pinch clamping system allows the EZ-Step to install virtually anywhere along the rock rail, enabling you to find the perfect location for entering or exiting the vehicle. The simple two-bolt installation takes a few minutes and does not require drilling or cutting. The steps are easily removable trailside for more serious off-roading. The clamping system includes foam pads that protect the OEM rock rail from finish damage during mounting.