• Max Speeds up to 3.0Gbps across the 2.4GHz, 5GHz, and 6GHz bands.
• The 2.4GHz for long range, 5GHz & 6GHz for high speed, interference-free, and Ultra-low Latency Wi-Fi
• MU-MIMO, 1024QAM, OFDMA, 160MHz channels and WPA3 in the less congested 6GHz band

• REQUIRES 12th+ Gen Intel Laptop system with CNVio2 support. This means your system MUST have been made in 2022 or later AND have CNVio2 support.
• **MANY SYSTEMS ARE NOT COMPATIBLE. Consult your system manual or manufacturer**
• No known support for Desktop / Workstation Systems

**Your system will not recognize this card--or may even fail to turn on--if not compatible**

• WPA3/ WPA-PSK/PWA 2-PSK/WPA 2/WEP
• Bluetooth Compatibility: Bluetooth 5.3
• Drivers are not included. Download drivers from HighZer0 Electronics or Intel support sites
• Antennas are not included

• Turn off your systems power, open the back cover, and locate the current wireless module.
• Gently remove the old antennas & old network card (there might be a screw to remove too). A small screwdriver from an eye-glass kit can easily free the antenna connectors.

• Reaffix the set screw, if needed, and then install your new network card.
• Gently and very carefully attach your original antenna connectors to your new network card. Line up the antenna and network card connectors, and gently push down.

• Test your new Wi-Fi Card by powering on your system. If your system does not automatically install the drivers, you will need to manually install both the Wi-Fi and Bluetooth packages.
• **If your system does not recognize the adapter after installing the drivers, you may have purchased a non-compatible card**