Gigabit WiFi Card | Intel Wireless-AC 7265 Dual-band（5GHz | 2.4GHz）1200Mbps | BT 4.2 Wireless Network Card | PCIe Adapter | PCI-E Wireless WiFi Network Adapter | Faster Speed | Better Coverage | Larger Capacity

• Brand：Ubit
• Model：WIE7265
• BT：4.2
• Antenna：360° Rotation External 6dBi X 2
• Data Modulation：OFDM/CCK/16-QAM/64-QAM
• Wireless Speed：5GHz 867Mbps or 2.4GHz 300Mbps
• Connect Interface：PCI express X1,Compatible with X4,X8,X16 Slot
• Supported Operating Systems： Windows 10, 32-bit*, Windows 10, 64-bit*, Windows 8.1, 32-bit*, Windows 8.1, 64-bit*, Windows 8, 32-bit*, Windows 8, 64-bit*, Windows 7, 32-bit*, Windows 7, 64-bit*, Linux*

Package Includes：1* Box with the Word "Ubit"；1* Ubit WIE7265 Wireless Dual-band Network WiFi Card；2* 6dBi Antenna；1* Bluetooth Cable；1* Low Profile Bracket；1 * Screwdriver；2 * Screw；1* Drive CD；1* User Manual

1.Question：Why this WiFi card can’t connect to 5G？

Answer：（1）Connect to 2.4G first, make sure it is connected；（2）Find your 5G signal and connect, most of them will work.

2.Question：PCs 2.4G works but cannot find my 5G signal？

Answer：（1）Connect 2.4G signal first；（2）Restart PC or re-plug this Wireless card.（Or in Device Manager-Remove this card and install driver again for it. Then PCs will find 5GHz and will allow PCs connect.）

3.Question：Why my PCs always get poor signal or drops sometimes?

Answer：（1）Test Wi-Fi signal in PC area(same spot,same height) by cell phone check if PC was placed in a Wi-Fi dead zone if yes,please change location for PCs；（2）If the distance little long PCs will get poor signal or only 2.4G signal. To improve this please considers change the PCs or Wireless AP’s location. Or you can buy a more power Wi-Fi Antenna for it.（3）In some regions, not all channels are available. Try to change the channel if you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is best. e.g.the channel can be adjusted according to the adjustment channel and the channel width,the speed 2.4G signal is 13, the channel width is adjusted to 40.

4.Question：Why my PC find 2.4G signal only?

Answer：PCs was placed too far away from Router. 5GHz band will support more data speed by covers a small area. Wireless AP or Router’s signal may cannot reach PCs location.Considers decrease the distance between Router and PC.

5.Question：I am a Linux user how can I get source code to compile my PC?

Answer：Go to open the mini CD in the package find ATH9K links get source code online. Or go to our site download ATH9K driver.

6.Question：My PCs find few signals only, not as expected performance, how to fix this?

Answer：Please remove Wi-Fi card from PCs and install it again.At the same time please screw Wi-Fi antenna and make sure it is screwed correctly. Most of time it is Wi-Fi antenna wasnt screwed properly.

7.Question：Windows10 64-bit system cannot load this card automatically how to fix this ?

Answer：Just need to install the drivers in mini CD,device will works properly. If do not have CD ROM, please go to our site download drivers for the models in your hand.