Coolant housing or water outlet serves as the connection point between engine and upper radiator hose.It may be made of metal, plastic, or resin, depending on vehicle’s manufacturer. In reality, metal is a precarious material. As being susceptible to rust from exposure to high levels of water, metal can become warped over time, and also splinter-off metallic shavings into cooling system. When your vehicles hood will be sizzling and smoking hot, you need to replace it in time.
The engine coolant water outlet with sensor connects the engine to the radiator for the circulation of coolant maintaining ideal engine temperature which prevents the engine from overheating and eventually causing severe damage to the engine. A water outlet serves as the link between your vehicles engine and the upper radiator hose. Usually bolted at the top of your vehicles water pump housing, helps keep your vehicles thermostat in place while protecting it from various debris.
|
|
|
---|---|---|
Compatible with:
|
Replacement Part Numbers:
|
Features:Made of high-quality plastics with high sealing properties Enhanced durability and resistance performance, provide leak-free performance Maintain the ideal engine temperature, and prolong the service life of the engine |
1. After waiting for the engine to cool down, disconnect the negative cable from the battery terminal
2. Find the location of the water outlet, follow the path of the engine manifold, starting from the radiator and the coolant tank, and after seeing the radiator hose, locate the housing on its top area
3. Before disassembling the old water outlet, drain the coolant in the radiator to avoid overflow or leakage during replacement
4. With the help of a wrench and a screwdriver, loosen and remove the bolt that fixes the water outlet to the engine manifold, take out the washer of the old water outlet
5. Remove the bolt from the shell, remove the washer, and replace it with a new one
6. Install the new water outlet on the top of the radiator hose
7. Starting from the outlet gasket, reinstall the other components that were disassembled in the reverse direction
8. Refill the reservoir with new coolant, start the engine and check for leaks