Feature

●【7 PC Pen Barrel Trimming System Inclusion】 3/8", 7mm, 8mm, and 10mm pilot shaft, 3/4" steel cutter & hex key Wrench & sleeve adaptor.
●【Fit to your Different requirement] For pens using 7 mm, 8 mm, 10 mm and 3/8" pilot shaft.
●【Best Choice for Your Hobby】 If you love to turn pens, then this kit is a must for your pen blank preparation process. Typically after you have glued the brass tubes into your pen blanks and the tube is completely dry, it is common practice to clean up, square and trim the ends of the blanks.
●【Easy to Use】 Cutting shafts will mount into a drill chuck or lathe chuck, the shaft will clean and remove any excess glue from the tubes. Cleanly remove excess glue from your turned pen tube and blank.
●【EXTREME HARD 】- These Pen Barrel Trimmers are made of solid carbon steel holds edge longer than standard barrel trimmers, offers superior cutting strength for maximum drilling outcomes.

[Pen Mill Kit- 7Pcs]




[Pen Mandrel - MT2]





Description

Wood Turning Pen Barrel KitsWood Turning Pen Barrel Kits

Phukimlong is a tool brand with the most professional designers and operations teams ,is committed to offering families the simple and friendly tool products. No matter what kind of tools you need, Phukimlong can provide you. This is our slogan.

Wood Turning Pen Barrel KitsWood Turning Pen Barrel Kits

LOGOLOGO
Phukimlong Slogan

Phukimlong is a tool brand with the most professional designers and operations teams ,is committed to offering American families the simple and friendly tool products.

No matter what kind of tools you need, Phukimlong can provide you.

This is our slogan.

Brand Introduction

PHUKIMLONG is a company specializing in R&D and manufacture of precision DIY woodworking tools over than 25 years.They give each of our products a robust design and attractive appearance that will be sure to stand out on your store or workshop.

Features: Pen Mill Set ( 7 PC Pen Barrel Trimming System ) 7 mm, 8 mm, 10 mm and 3/8" tubes

  • 7mm, 8mm, 3/8", and 10mm pilot shafts
  • 3/4" squaring cutter
  • Allen wrench
  • 0" Size shaft
  • O Fits over 7mm Pilot to keep it centered
Wood Turning Pen Barrel KitsWood Turning Pen Barrel Kits

Application

For wood lathe ,We recommend that you use wood lathe chuck with dovetail jaw to chuck to clamp pen blank . For Drill press, it is recommended that you use a pen centering vise (not included) to help secure the pen blank. It also helps to use a pen centering vise for better accuracy when drilling with the Pen Barrel Trimmer.

For Hand Drill , we recommend securing the blank into a workbench vise if a pen centering vise is not available to you. The kit includes a 3/4 inch cutting Head, 7mm, 8mm, 3/8 inch, 10mm Pilot Cutter Shaft, 0 Size Adaptor Sleeve and a Hex Key Wrench for the cutting head.