Feature

●【20Gbps NVMe Enclosure】AOKO NVMe Enclosure Uses the latest USB 3.2 Gen2x2 interface with 20G Theoretical Speed (AOKO laboratory test read speed is 1.90GB/s, write speed is 1.87GB/s, the test equipment is desktop USB3.1/3.2 Gen2x2 expansion card+samsung 980 pro 500GB PCIe NVMe Gen4 SSD+C to C Cable).
●【Efficient cooling system】The NVMe Reader adopts an all aluminum body with fin heatsink for increased cooling area. There is also a cooling fan and a cooling silicone pad. When the temperature reaches 38°, the cooling mode will automatically turn on and the fan directs air flow to expel heat quickly to protect your SSD.
●【Widely Compatibility】AOKO NVMe to USB Adapter compatible with only M.2 PCIe NVMe M key in sizes 2280 / 2260 / 2242/2230 solid state drivers,Not Compatible with M.2 SATA and Macbook SSD/ PCIe AHCI SSDs.compatible with Windows, Mac OS, Linux, Android system.
●【USB C interface】AOKO NVMe Case adopts USB-C interface, USB 3.2 Gen 2x2 USB C transfer rate, the speed can reach 2000MB/s. And it can be flipped and used without distinguishing the front and back.
●【Small and portable】AOKO M.2 NVMe Enclosure is Small,easy to carry, plug & play, no driver required, easy to connect with personal PC/laptop/smart TV and smart router devices using USB C to C +A cable.

[40G NVMe Enclosure]




[20G NVMe Enclosure]





Description

USB 3.2 20Gbps M.2 NVMe Enclosure USB 3.2 20Gbps M.2 NVMe Enclosure

  • Designed for M.2 NVMe using the latest USB 3.2 Gen2x2 with a theoretical transfer speed of 20Gbps. (Actual transfer speeds depend on your hardware device, such as your SSD transfer speed, the type of USB port, and your computers performance. If your USB port is a 20Gbps port and you are using a very fast NVMe drive, you will get speeds close to the theoretical values)
  • All aluminum body + side fin cooling design, and with cooling fan and cooling silicone sheet, multiple cooling design perfectly solves the problem of NVMe drives getting hot and burning during use, improving the performance and experience of the drive. Supports multi-size M.2 PCIe NVMe SSD Size 2280/2260/2242/2230 .compatible with Windows, Mac OS, Linux,Android system.
  • Plug & Play support, no drivers required - connect this NVMe Reader and device with USB and youre ready.

Warm Tips

  1. The first time you use the SSD, you will need to format the disk (you must plug and unplug the SSD with the power off to avoid damaging the data). Make sure the SSD is oriented before inserting it into the slot to avoid damaging your SSD.
  2. The operating temperature of NVMe SSDs varies depending on the environment and may reach up to 60° when used in a hot environment, do not touch.

ASM 2364 high-performance main control chip, to protect youASM 2364 high-performance main control chip, to protect you

Contact temperature control fan, efficient heat dissipation and energy savingContact temperature control fan, efficient heat dissipation and energy saving

Small portable bagSmall portable bag

Steps to use

Step 1Step 1

Step 2Step 2

Step 3Step 3

Step 4Step 4

  • Use an Allen screwdriver to unscrew the four screws of the upper cover, remove the upper cover.

  • Use a Phillips head screwdriver to screw out the gong column that holds the hard disk (can be moved to the appropriate fixed position according to the size of the SSD)

  • Tilt the hard disk 45 ° into the slot and then lightly press the tail, and then screw back to fix the NVMe SSD.

  • Install the top cover in the direction shown and tighten the screws to complete the installation (Note: the fan contact switch should be aligned with the thimble on the PCBA board)

NVMe Enclosure Parameters

  • Name: M.2 NVMe 20Gbps Enclosure with Fan
  • Transmission interface: Type-C interface
  • Color: black
  • Material: all aluminum alloy
  • Applicable hard drive: M.2 PCIe NVMe SSD
  • Size: 103*52*27.5mm
  • C to C+A Cable: 30cm