Feature

●5 M12 Lenses, carefully selected with minimum distortion, tested on 1/4” image sensors like OV2640 and OV5647
●Come in 5 different FOV (Field of View), Horizontal FOV ranging from 45 to 90 degrees on a 1/4” sensor.
●Caps labeled, screws and m12 lens holder included, specifications provided. A lifesaver for picking and changing lenses
●NOTE: This kit shares the box with our 10-lens M12 lens kit, so it only takes half of the space, and some sockets are left empty


Description

22
33
44
55

Note:

1.Choose a suitable lens holder as follows:

a) Determine the lens holder height listed in the lens specifications for your selected lens. If you use a different lens holder height, you might not be able to focus the lens at all.

b) Ensure that the lens holder matches the screw hole pitch of your camera board. Lens holders are available with18mm and 20mm pitches.

2.If required, the thread gap between the lens and lens holder can be filled with damping grease or similar glue in order to fix the lens in position after focusing.

3.Specks of dust or tiny bubblers might be visible on the image while focusing the lens. These will disappear when the lens is in focus, and will not affect image quality.

4.When focusing or replacing a lens, do not screw the lens into the lens holder too deep, otherwise the lens might touch and damage the image sensor. Often, focusing a lens is performed while monitoring the image quality on a video screen. A blurry image will result if the lens is screwed in either too deep or too shallow from where it is in focus.