Description:
Fits on Amura-Seiki, Fadal, comet, Daewoo, Dah Lih, Hass, Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura, Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, Sharp
5 x CAT40 Pull Stud
This pull stud fit for the following: JM71123 TJ Davies PSC-470 X 15 Lyndex C40-1500-ISO Collis 69004 Command RS4E-0114-C
Material：40cr
HEAD DIAMETER D1 0.747"
HEAD ANGLE 15°
DRAWBAR THREAD SIZE 5/8"-11
MACHINE TAPER SIZE CAT40
MACHINE BUILDER DMG Mori, Doosan, Feeler, Mori Seiki
NECK DIAMETER D2 0.549" HOLE D3 0.281" PILOT D4 0.641"
OVERALL LENGTH L 2.001"
SHOULDER TO HEAD L1 0.787"
SHOULDER TO END L2 1.024" COOLANT HOLE
Feature:
1、Using 40cr forging.
2、After carburizing, the outside of material is hardened, and the inside of material is still soft and has enough toughness. Therefore, Material has higher wear resistance and better toughness.
3、CNC on all critical surfaces including a pilotunder the flange of retention knob for full contact between tool holders taper end and retention knob.
4、Precision grinding pull stubs have higher surface finish and dimension accuracy. The fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of machine tool and cooperation, so as to improve the accuracy and stability of the connection and improves the precision of the machine tools and lengthens the service life.
5、Precision finished on the bottom of the flange to improve fitting with the bottom nose of the taper on the tool holder.High quality black oxide finish can ensure long pull stub life and a non-rusting surface.