Step1. Clean Surface Always inspect vacuum pads before use. Clean vacuum pads and the load surface between each lift. Make sure both surfaces are dry and free of dust, oil, grease or water.
|
Step2. Pump & Moving Pump the plunger a few strokes, When The Red-Line disappear Its Ready for lifting and moving materials. the cup will attache the surface completely and hold suction for more than 24 hours.
|
Step3. Quick Release Upgrade Release Valve, Quick and Complete Release by One Press, When The Red-Line Show up, remove the pump easily. Make sure that the sealing lip of the suction cup is intact.
|