Feature

●0.96 oled SSD1306 128X64 OLED LCD Display with IIC/I2C Interface-4PIN.
●OLED display built-in standard driver chip SSD 1306 already exists in the libraries of Raspberry Pi and 51 Series,which makes programming very easy.
●0.96inch OLED display module with high resolution of 128 x 64 pixels,no need backlight and self-illumination, OLED display Module 128x64 provides plenty of space for displaying elements.
●This oled display can be widely use with Arduino, Raspberry Pi, 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily.
●With four square holes, 0.96 I2C OLED display module can be installed easily, truly convenient to use and simple you working.

[0.96 yb]

[0.96 white]

[0.96 blue]

Description

Specifications:
0.96 inch OLED display chip: SSD1306
Interface Type: IIC / I2C-4PIN
High Resolution: 128 * 64 Pixels
Voltage: 3 V ~ 5 V DC
Viewing Angle: greater than 160 degrees
Low power consumption : Full Screen 0.08 w
Operating Temperature: -30 Celsius ~ 70 Celsius
Support many control chips:
Fully compatible with Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc

Pin Definition:
GND: OLED Power Ground
VCC: OLED Power Positive 3.3-5 V
SCL: OLED IIC Clock
SDA: OLED IIC Data Line

Note: OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally.

1 X 0.96 Inch I2C OLED Display
1 X Plastic stoage box