[12]

[2]

[24]

[3]

[6]

High performance neutral cure silicone which is particularly designed for bonding the mirrors in all kinds and sizes without harming the mirror. A bonded mirror is safer because there is no risk of large pieces of glass falling in the event of breakage. Sealant applications like circle or rectangle shaped would block the air circulation. Because of this, in course of time, degradation of mirror might happen. In 5-10 minutes the mirror has to be bonded to the surface after sealant application. After bonding, for preventing the mirror from slipping down, the mirror should be fixed with tool like a tape etc. For a better bonding, this fixing application should be done vertical, not horizontal. For full curing, at least 24 hrs should be waited after application (depends on thickness of sealant, humidity in the air and temperature). Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically. SUBSTRATE: The wall or ceiling should be clean, dry, dust and grease free. Remove any lose material and repair unsound plaster. On dusty and porous surfaces priming can be necessary. MIRROR: Clean the painted side of the mirror with methylated spirit. Do not use if the mirror is backed with plastic safety film