Feature

●A throttle body is a butterfly valve located between the air intake filter and the intake manifold.The throttle body is responsible controlling the amount of air that flows into an engine.It opens and closes depending on input from the driver applied through the gas pedal. As the gas pedal is pushed down, the valve opens, allowing air to enter the engine.As more air flows into the engine, it injects more fuel, thus allowing for more power.So the throttle body is very important for the engine.
●This throttle body fits for Volkswagen Beetle 2007 2.5L, From 5/07 2008 - 2010 2012 - 2014 2.5L; for Volkswagen Golf 2010 - 2014 2.5L; for Volkswagen Jetta 2007 2.5L, From 12/12/2006 2008 - 2015 2.5L; for Volkswagen Passat 2012 - 2014 2.5L; for Volkswagen Rabbit 2007 From 11/06, VIN 1K.7.115 001 2008 - 2009.
●Customers can find the product you need accurately according to the OE number. OEM Number: 07K 133 062 A, 07K 133 062A, 07K133062A.
●The throttle body regulates the proper volume of airflow into the engine which is essential to the mixture of fuel and air in the engine. When a throttle body goes bad, then it wont function properly. If it stays shut then your engine is not going receive air and it wont start. When the throttle gets stuck in an open position than your vehicle will receive too much air and cause it to have a high or fluctuating idle.
●If you are experiencing engine stalling, failing to start, electronic throttle warning light came on, hesitation or power surging on acceleration on your cars then you may have a problem with your vehicles throttle body. This throttle body fits 07 08 09 10 11 12 13 14 15 years.

[12577029]




[07K133062A]





Description

22

What is a throttle body?

A throttle body is a butterfly valve located between the air intake filter and the intake manifold. As the gas pedal is pushed down by driver, the valve opens, allowing air to enter the engine. As more air flows into the engine, it injects more fuel, thus allowing for more power. A properly sized throttle body will provide sufficient airflow and velocity for good engine power and throttle response.

When a throttle body goes bad, then it wont function properly. If it stays shut then your engine is not going receive air and it wont start. When the throttle gets stuck in an open position than your vehicle will receive too much air and cause it to have a high or fluctuating idle.

11

Symptoms of a Bad or Failing Throttle Body:

1. Dirt, grime, and carbon deposits on the inside of the housing

Similar to dirt and grime, carbon deposits can create an uneven surface inside the walls of the throttle body which can disrupt the atomization of the air/fuel mixture.

2. Electrical problems

In the case of the throttle body, electrical connection problems will cause inaccurate or intermittent information to be relayed to the car’s computer, resulting in faulty corrections to the air/fuel mixture.

3. Vacuum leaks or an incorrectly adjusted throttle stop

Vacuum leaks can disrupt the air/fuel flow due to an imbalance of air flow which can cause throttle body pressure problems. The issue could also be an incorrectly adjusted throttle stop.

4. Poor or high idle

When a throttle body is not functioning correctly, some noticeable characteristics may be poor or very low idle. This can include stalling when coming to a stop or very low idle after starting, or even stalling if the throttle is quickly pressed.

33

This throttle body fits for the following vehicles:

Volkswagen Beetle 2007 2.5L, From 5/07 2008-2010 2012-2014 2.5L

Volkswagen Golf 2010-2014 2.5L

Volkswagen Jetta 2007 2.5L, From 12/12/2006 2008-2015 2.5L

Volkswagen Passat 2012-2014 2.5L

Volkswagen Rabbit 2007 From 11/06, VIN 1K.7.115 001 2008-2009

Customers can find the product you need accurately according to the OE number.

  • 07K 133 062 A
  • 07K 133 062A
  • 07K133062A

How to replace a throttle body?

1.Open your hood and locate your engines throttle body.

2.Remove the air intake duct at the throttle body.

3.Inspect the throttle body ports for carbon build up. Throttle bore wear is also common after long periods of time and throttle body assemblies will need to be replaced if worn.

4.Remove the throttle cable from the throttle body control lever.

5.Disconnect any air or vacuum hoses from the throttle body.

6.Remove the throttle position sensor from the throttle body.

7.Remove the throttle body mounting screws and remove the throttle body assembly. Discard the old gasket and install a new gasket between the throttle body and manifold during installation.

8.Match the new throttle body to the old throttle body making sure that sensors, hoses and cables are all routed correctly to the new throttle body and that it mounts correctly to the intake manifold.

9.Install in reverse procedure and follow manufacturer torque specifications during installation.

0
Portable Tire Inflator
Output Voltage: DC 12V
Max Inflatable Pressure: 150PSI
Cable Length: About 3M

Product information