1.The printer only loads paper without printing contents.
Check whether the label paper is reversed.If not,double click the On/Off button to print self-test page.If the self-test page cannot be printed,the printer is malfunctioning.
2.Blurry printing
Check the print density whose default value is 2 for the best printing effect. If the prints have a horizontal line or only some of contents can be printed,check if the print head is clogged and clean it with alcohol. If the print quality is poor,please use NiiMbot printer paper series.
3.The printer keeps delivering paper and cannot be stopped.
If no paper gap is detected after 200mm paper is loaded,there are three possibilities as follows: Check the default paper type.Only NiiMbot exclusive themal paper can be used.When the cracking noise arise,the printer paper is used up.Please refill paper.If neither of the problems above occur,open the paper bin and close it before restarting.If the problem persists,the printer is malfunctioning.
4.An "Out of Paper" error displays
Check if the printer paper has been used up.