Feature(may vary by option.)

●This is a robust, high pressure, large output snow machine that produces abundant amounts of snow that are capable of blowing considerable distances.
●The durable motor is enclosed in rubber cushions within the case for high output and low vibration.
●Hanging bracket comes standard for ease of trussing and installation.
●This model is light and portable machine which are perfect for club effects, movie sets and stage settings where quiet scenes and lifelike snow effect are demanded. Let the snow fall all season round!
●Voltage:AC110V,60Hz, Power:600W, Tank Capacity:1 L, Coverage Area:60m³, Warm up time:3-5min, Remote control, G.W.:3.5 kg,Packing Volume40*24*23cm.

[DMX512 RGB 3in1]

[600W]

Description

Please note: It is normal that there is a little liquid remained in the tank when you receive the unit. Because we will test our product before it is sent to our customers, to make sure that it can work properly and is in a good condiction.

Specifications:
The compressed air wind pump produce the force air current ,but long -distance range spraying snowflake.
Two grade of power design ,snowflake .
Thermal:
Maximum ambient temperature (Ta): 40 °C (104 °F)
Maximum surface temperature: 80°C (176 °F)
Voltage:AC110V,60Hz
Power: 600W
Tank Capacity:1 L
Coverage Area:60m³
Warm up time:3-5min
control
G.W.:3.5 kg
Packing Volume40*24*23cm

Operation:
1.Remove all the packing before use. Then clean the spray nozzle to make sure the nozzle is without any hindrance.
2.Place the machine uprightly in a horizontal surface, then loose the cap of liquid tank to pour into the recommended or other high-quality water-based snow liquid.
3.Make sure the Power Switch on rear side of the unit is in the "OFF" position.
4.Plug the remote control through the "REMOTE CONTROL " connector on rear side of the unit.
5.Plug the Power Cord into a grounded electrical outlet consistent with the units rated voltage.
6.Turn the Power Switch to the "ON" position. And the indicator on remote illuminates. 7.Allow the unit to warm-up about 4-5 minutes.
8.Press the button on remote for emission and release for pause.
9.To turn off the snow Machine, switch the Power Switch at the rear of the unit to the "OFF" position.