Feature

●◆ Function: phase sequence detection, live line check, simple performance check, live cable identification, phase loss assessment, search for cable break position, detection of DC line break point, line maintenance
●◆ Non-Contact Inspection: Non-contact inductive measurement of the terminal type without opening the cable, without touching the exposed high voltage fire cable, with the three highly insulated super inductive terminals inserted directly into the cable insulation skin 3-phase live detection for safe and quick productivity.
●◆ Positive and Negative Phase: With the LED display, dynamic sound and light perfectly show the positive or negative phase of the phase sequence of the three-phase power supply, which can be seen at a glance.
●◆ Magnetic base: The base plate of the instrument is equipped with 4 magnets that can stand a quality of 800 g. They can be attached to the metal case of the device during the test, and it is convenient and convenient to use.
●◆ Wide Voltage Test: This phase meter can detect three-phase voltages from 70V to 1000V and has excellent performance.


Description

Specification:
Model :ETCR1000C
Power Supply
DC 3V2*AA Alkaline dry battery , Continuously working for 70 hours
AC Voltage Range(V)
AC 70 - 1000V, 40/65Hz (Sine Wave Continuous Input)
Clamp Wire Size
External Diameter 1.6-16mm
LED Display
(Positive Phase Sequence)
The four phase-sequence lamps light in order (clockwise).
(Negative Phase Sequence)
The four phase-sequence lamps light in order (counterclockwise).
(Live Power)L1,L2,L3 lamp light up in the voltage setting range.
(Phase Loss) L1 or L2 or L3 does not light.
(Short Circuit)L1 or L2 or L3 does not light.
Power On Indication
Power on indication light turns on; Low power, low battery light on
Magnetic force
Four magnets on the back of the meter, which are attached to the distribution box and can withstand 800g quality.
Auto Power off
After 5 minutes, the meter automatically cut off power supply.
Meter Dimension
Width, height, thickness 70mm*75mm*30mm
Clamp Length:0.6m
Weight:317g
Working Temperature and Humidity
-10-55; below 80%rh
Storage Temperature and Humidity
-20-60; below 90%rh
Maximum Measured Voltage:AC 1000V
Dielectric Strength:5.4kVrms
Maximum rated Power:100mVA
Safety Provisions
EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT 3 (600V), Transient over-voltage 6000V

Package list:
1 * Non-Contact Phase Sequence Detector
1 * User Manual