Feature

●【New Design LED Channel】: Flexible silicone LED channel systems(integrated one piece) are great substitute for traditional LED aluminum channel profile, more tasteful and space-saving; They can be bent freely and cut easily for any creative shape of wall artwork neon signs in different length needed. S0513 tube is front glowing, can see light spots slightly.
●【Fit for ≤10MM Wide Strip】: S0513 silicone tube fits for ≤10MM NON-waterproof LED light strip(NOT included). For finished neon lights, please search Asin B08LB3MKYL (warm white) / Asin B08LYZHCNR (RGB). For more size/type silicone tube options, please search 360DigitalSignage silicone led channel.
●【Surface-Mounted with Clips】: 5M silicone LED channel tubes (can be cut) comes with 10 x end caps,15 x mounting clips and 15 x screws for installation. Noted: 3M adhesive backing tape CANNOT hold the tube with lights in place, not sticky enough!
●【Wide Application】: Achieve under-cabinet and back splash lighting, accent lighting and decoration lighting with ease. LED channel system can be widely used in kitchen, living room, patio, bedroom, closet, bar, cinema, shop, cafe, parties, show display window, supermarket, etc. IP67 waterproof rating makes it a best choice for both indoor and outdoor decoration.
●【Customer Service】: If you have any problem with our products, please feel free to contact us asap, will solve for you within 24 hours. Please noted 100% fully enclosed silicone will be a little difficult to pass through the led strip for its toughness and elasticity, for your convenience, finished lights(tube with led strip) also available in our online shop. ☛Asin B08LB3MKYL (warm white) / Asin B08LYZHCNR (RGB).

[10x10mm-Silicone tube only]

[4x10mm-Silicone tube only]

[16x16mm-Silicone tube only]

[6x13mm-Silicone tube only]

[5x13mm-Silicone tube only]

[12x12mm-Silicone tube only]

[13x15mm-Silicone tube only]

[6x12mm-Silicone tube only]

[20x14mm-Silicone tube only]

Description

Overall picture of LED Silicone Channel System application

Features:

Specification:

Total length: 5M/16.4Ft

Color: Milky white silicone (integrated one piece)

For Strip Width: ≤10mm

Beam Angle: 180 degree

Material: 100% Silicone

Waterproof: IP67

Light Source: SMD 2835,3528,5050,5630,5730,etc.

Outside Dimensions: 10 x10 mm

How to pass the LED strip light through the silicone channel tube?


1. Lay the tube flat and straight, No knots or twists;	2. Tie up the LED strip with the tiny rope at one end of the tube; (Use LED strip without adhesive backing tape, or peel off the backing tape if it has, and wipe the PCB with alcohol for pass through easier)	3. One person fix the tube end with strip and push on the strip slowly, one person pull the tiny rope at the other end of the tube to lead the strip through.

Tips:

* It is a little difficult to pass through the strip because of the toughness and elasticity of Silicone material, patience is very important for this DIY project.

* Choose suitable width of LED strip to pass through the silicone tube for great effect of lighting, wider ones can not insert into the tube, narrower ones will shake inside which makes the lighting flicker not stable.

* Two people is suggested to work out this.

* Do not pull the rope too hard while snaking the LED strip to avoid it broken inside the tube.

* Cut the silicone tube for length you need if you do not need whole 5 meters for DIY projects, but make sure the rope was reachable from both sides, do not let the rope slip.