Feature

●? 100% SATISFACTION GUARANTEE OR MONEY BACK: Settings and marking techniques may vary depending on the laser and metal product being marked. We can usually resolve most marking issues with simple setting adjustments. Please feel free to contact us directly.
●? FOAM BRUSH INCLUDED: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the first arrow mark. Mix/Shake well, Use foam brush to apply on the substrate surface, apply a thin coat using left to right motion, as long as you do not see through the surface.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Support Team.
●? PREVAL READY BOTTLE: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the second arrow mark. Mix/Shake well. Install Preval Aerosol as per the manufactures directions and use it just like an Aerosol Spray.
●? GENERAL GUIDELINES/SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers are not recommended.
●? MULTI PACK DISCOUNT: Get more discount (SAVE with our bundle options, check out our listings with multi packs. Also available in Aerosol Spray Cans.


Description

Liq Ready-Photo HeroLiq Ready-Photo Hero

Product Key Features

PermanentPermanent

High contrastHigh contrast

Heat resistantHeat resistant

DurableDurable

Why Brilliance Laser Inks?

Liquid ReadyLiquid Ready
  • Preval Ready
  • Easy to apply. Easy to wash off.
  • Anti-Clog Technology (using spray system)
  • Permanent Mark
  • Quick dry
  • Works on various metals
  • Up to 500-1,000 square inch of coverage
  • Perfectly compatible with CO2 and Fiber Laser Nd:YAG Laser Systems

Laser marking made easy with our Liquid Ready (in 120 ml)

Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.

Liquid Ready as the name describes contains pre-measured powder product and is ready to add denatured alcohol without any hassle. It is also compatible to preval spray system which makes the product convenient to use.

Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.

How To Apply Liquid Ready

LiqReady-1LiqReady-1

LiqReady-2LiqReady-2

Aerosol-Step3Aerosol-Step3

Aerosol-Step4Aerosol-Step4

Step 1

Clean the substrate with denatured alcohol so its free of any dirt and oil.

With denatured alcohol, fill to the desired brush or spray application line, mix and stir the content well.

You may substitute denatured alcohol with isopropyl alcohol, ethanol, rubbing alcohol or methanol.

Step 2

Brush application: Every purchase of our liquid ready comes with one (1) foam brush applicator. Apply even coats with the foam brush as long as you do not see the substrate through the coat.

Preval spray system application: Screw on a Preval spray system to the bottle and spray evenly just like an aerosol spray.

Allow the solution to dry fully or use a hair dryer or heat gun to dry it in seconds.

Step 3

Adjust your laser settings and focus the beam on the substrate then make your mark!

For guidance, refer to the table below for suggested starting parameters for your laser and substrate. For optimal results, you may need to adjust the parameters for your specific laser.

Step 4

You may instantly wash off the excess ink with water or a damp cloth. There is no waiting time needed!

Voila! You now have a permanent mark on your finished product.

Suggested settings for CO2 and FiberSuggested settings for CO2 and Fiber
Aerosol black metal laser ink marking spray 1 2 4 Powder-1
Brilliance Laser Inks Black Aerosol Spray Brilliance Laser Inks Brown Liquid Ready Brilliance Laser Inks Powder (50 g) Brilliance Laser Inks Powder (250 g) Brilliance Laser Inks Powder (500 g)
Brush Coverage (approx.) 500 sq. in. 1,000 sq. in. 5,000 sq. in. 10,000 sq. in.
Spray Coverage (approx.) 4,000 sq. in. 1,000 sq. in. 2,000 sq. in. 10,000 sq. in. 20,000 sq. in.
Colors Black, Red (Copper) Black, Red (Copper) Black Black Black
Preval Ready ?