Feature
●Fuel can spouts are made of high strength ABS plastic, improved gasket more reliable and no leak
●Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling
●Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
●Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans
●Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)drill bit. 3 Kits included
Description
Gas Can Spout Replacement Kit with Flexible Pour Nozzle Gasket Screw Collar Cap Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon
Feature
- Gas Spouts including Gasket Spout Part Replacement #706.Fits for Gott / Rubbermaid Plastic Can .
- If only using the Spout & Stopper alone, these may fit of some other brand plastic gas cans using your own existing screw cap collar for blitz, midwest, scepter. (These do not work with Chilton / Sears Craftsman cans).
- Stopper nozzle caps with lanyard for retaining the cap to prevent loss.
- Black Rear Air Vent Caps including Gasket & Strap.
- Yellow corse thread cap which makes it suitable for the following cans: Blitz, Briggs & Stratton (later models), Eagle, Igloo, Midwest Can (gas, water, diesel), Scepter, and Stancan (metal).
- Black fine thread cap, which makes it suitable for the following cans: Blitz (gas, kerosene, and diesel), Briggs & Stratton (early models),.Essence, Gott, and Rubbermaid.
- Spout is flexible and bends up to 90 degree make gas/water easily flows out no more spilling.
- Nozzle is translucent that you can see the gas flowing through by color changing.
Gas Can Vent Cap with Drill Bit
- Drill required.Start with an empty can, Drill 1/2" hole at the back of your plastic can above the fill line, insert vent cap and pop it in gently with a rubber mallet.We suggest you drill a smaller hole to start with and work your way up to the 1/2" drill bit.
- Be sure to drill a straight clean hole dont swagger side to side with the bit so you wont make a bigger hole than you need.
Specifications:
- Size(Nozzle Length):approx 8.07" Length with Gasket is approx1-1/2" Width
- Black fine thread’s inside dimension is 1.75"
- Yellow coarse thread’s inside dimension is 1.75"
- Yellow stopper cap’s inside dimensions are 0.78"
- Black Rear Stripe Cap’s dimension is 0.78"
- Connected Strings Length is 0.78"
- NOTE: Please check your container outside thread diameter before you make this purchase
Nozzle can be stored inside or in normal use positiona that convenient to transport and use
