Free to adapt any angle, any direction
If your line interferes with an existing hookup, the XLR Angle Adapter solves the problem without extensive rewiring or the need for additional equipment. Rotate the 3-pin male or female end of the connector in an upward, downward, leftward or rightward direction a full 90°. Once in place, tighten the screw to prevent unwanted movement or loosened cables, and your custom setup is ready to rock. It’s that simple!
5 easy steps to setup
1. Use a screwdriver to loosen and remove the adapter’s locking pin
2. Use pliers or your finger to gently pull the 3-pin connector from its housing
3. Rotate in any direction?but no more than 360°
4. Push the connector back into the housing, replace screw and tighten
5. Plug the adapter into any mixer, hook up your cable and get playing!