[3-Pack Red]
[6-Pack Red]
[2-Pack Red]
Canister flush valve seal replacement for Kohler K-GP1059291 canister flush valve seal red.
Equivalent to part number K-GP1059291
Installation instructions:
1) Turn the stem inside the cylinder 1/4 of a turn counter-clockwise, the trick is to lift the can and do it from under the can (but still inside the can). Note: If you try to turn from the top of the canister, you may break the valve stem.
2) Remove the stem and old gasket, be sure to wipe off any old rotting rubber on the surface of the old seal.
3) Secure the inner ring of the seal around the tank lip. You should go around it a few times to make sure it fits.
4) Once youve done this, just do the opposite of what you did to put it back together, remember to turn the stem from below the tank, not the top. You should also give it a few test rinses to make sure its fully functioning and sealing properly.