Feature

●[Size]: Thread: M7; Nozzle Diameter: 0.6mm; Input Diameter: 4mm; Total Dimension: 13x9mm / 0.5"x0.35" (L*D)
●[Compatibility]: for 1.75mm Filament MK10 3D printers.
●[Brass Material]: Not easy to get rust or erosion, provides long service life.
●[Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
●[Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.

[M6x0.4mm Brass Tone]




[M7x0.4mm Brass Tone]




[M6x0.3mm Brass Tone]




[M7x0.2mm Brass Tone]




[M6x0.2mm Brass Tone]




[M7x0.6mm Brass Tone]




[M6x0.6mm Brass Tone]





Description

111111
111111

4343
Specification:
  • Material: Brass
  • Screw Thread: M7
  • Input Diameter: 4mm
  • Filament Diameter: 1.75mm for MK10
  • Nozzle Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm

How to Change a 3D Printer Nozzle?

1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid scalding.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

  • Stamp size on surface, convenient to pick the one you need.
  • The hole of print nozzle is consistent size and machining, the thread is clean and well formed.
  • Can be used to print PLA, ABS, PETG, Nylon, TPE, TPU, PC and most any other non-abrasive materials.
1111

Why Would You Need More Than One Nozzle?

  • You want to print a model quickly, so you use a bigger nozzle
  • Your current nozzle gets clogged, and you need to replace it
  • You want fine details, so you use a smaller nozzle

As the last part to be in contact with filament, the nozzle can influence strength, print time and print material.

Customers also search