Feature
●Reversible Design -- Both ends of the J-pole antenna mount can be used.
●Wall Mounts & Brackets -- Best accessory for you to mount your outdoor antenna and weather station. With best size design, it can fit most outdoor antennas and weather stations.
●Adjustable direction -- The mounting pole can be rotated 60° for best reception angle to get strongest signals.
●Easy installation -- Comes with all the screws and plastic anchors, super easy to assemble.
Description
|
|
|
|
|
|
|---|---|---|---|---|---|
| 16.5" Mounting pole | 16.75" extending pole | 34.5" Mounting pole | 49.5" Mounting pole | Wall Mount | |
| Diameter | 1" | 1" | 1" | 1" |
|
|
|
|
|---|---|---|---|
| 16.5" Mounting pole | 33.25" Mounting pole | 66" Mounting pole | |
| Diameter | 1.25 " | 1.25 " | 1.25 " |
|
|
|
|
|---|---|---|
|
|
|
|
It can be rotated 180° for the best reception angel
Installation
1. Select a best mounting location.
2. Place the mast through the mounting base of the J-pole.
3. Level up the mounting base and then mark the pilot holes to be drilled with a marking pen.
4. Drill the pilot holes (with a drill bit about half the diameter of the bolt) into the marked areas.
5. Line up the holes of the mounting base of the J-pole with the drilled holes.
6. Drill and then secure the lag bolts into the pilot holes.
7. If necessary, you may adjust the direction of the mast by loosening the two lateral nuts on the mounting base of the J-pole.
Need an antenna that comes with all mounting accessories?
Dont worry about searching for a suitable mounting pole, because one is already included in the box.