Two Extra UHF Elements and Up to 50% larger VHF Elements

• In addition to receiving only VHF / UHF signals, our premium antennas can even receive DTV / FM signal
• Two extra UHF elements and Up to 50% larger VHF elements to enhance the UHF/VHF channel reception and better image quality. Up to 25% more reflected area to enhance the receptions for all Channels. High quality copper cable to enhance the signal transmission from antenna to the receiver. Special wind proof design to enhance the durability of the Antenna. By using much higher quality material to make this antenna to last longer in all weather conditions.

Antenna Connection

Our antenna is pre-assembled, this step will take under 5 minutes.

• Connect the antenna top to the antenna input of the control box using any coaxial cable.
• Plug the control box power supply into the wall. The control box is the device that you point your remote control at to make the antenna rotate. The control box is usually installed next to your TV set.
• Connect the control box to your digital TV or converter box if needed. Remember, only old style analog TVs need a converter box. Scan for available antenna channels using the add channels option on your TV or converter box.

Perform a Channel Scan

• Mount the antenna on your rooftop for optimal performance.
• Consult related instruction manual to SCAN the channels if you use a digital converter box
• Find the setting option on TV menu. Set up the signal source to AIR/Antenna.
• After you set up the signal source, go to Channel Scan or Channel Manage to scan the digital channels.