Heavy Duty Mic Stand •This special part provides the support with an upward pull. Compare with the our old version, it has a greater bearing capability •If you have adjusted all the buttons and still feel a bit shaky, pleas dont forget to tighten the little screws on this triangle part •Four springs are the support for weight bearing. If you want more weight bearing, you can turn the spring forward by one degree
|
Mic Stabilizer & Adapters •You can adjust the 0-rings for different diameters and varying degrees of tightness (pic 4 & video) •We specially purchased 3/8” to 5/8” original metal adapters to meet most of the microphones on the market. Compared with our previous yellow brass adapters, this metal adapter is more suitable •There is a plastic adapter come with the shock mount. If the metal one is not suitable, it can be temporarily replaced by the plastic one
|
Table Clamp for Full Angle •Try to make the table clamp and mic arm stand facing in the same direction,will be more stable, especially for customers with small tables •180° foldable arm and 360° swivel mount the stand can be moved in full angle •The table clamp with a layer of sponge to protect the desktop, you can add an extra latex washer to increase friction and protect the bottom of the desktop
|