Feature
●A high-tech synthetic coating for your wheels, Wheel Seal provides a shield that prevents brake dust and other tough contaminants from embedding.
●Designed for high heat resistance, itll hold up at the highest of temperatures and prevent etching or pitting.
●Wheel SealÕs protective coating captures brake dust, preventing it from touching your wheelsÕ surface. From there, all you have to do is wash your wheels as you do the rest of your car and the brake dust will rinse right off with the Wheel Seal. Just re-apply and youÕre protected again!
●Wheel Seal bonds with the surface over a short cure time, creating a protective barrier that traps contaminants. No down-time!
●For best results, we recommend cleaning the wheels with our Premium Wheel Cleanser before applying Wheel Seal.
[12 oz.]
Description
Wheel Seal is a high-tech synthetic protective coating for your wheels which prevents the build up of brake dust. Its formula has extremely high heat resistance so it will last even if you take your ride to the track. Wheel Seal prevents damage caused by brake dust, road tar, and other road contaminants. What Makes This Product Unique? 1. Wheels get hot. In fact, nothing on your car besides the engine will even come close to generating the amount of heat that your wheels do. Many products out there are wax based, meaning that their melting point is far lower than the temperatures your wheels will reach just driving down the highway. Wheel Seal, uses a technologically advanced synthetic formula. 2. Between the acidic chemicals needed to remove brake dust and the elbow grease involved, it can be a taxing job for both you and your car. Wheel Seal provides a layer of protection in between your wheels and brake dust, meaning you wont have to use caustic chemicals to remove brake dust filaments. When your wheels are protected with Wheel Seal, just spray them down and watch the brake dust slide right off. Reapply after rinsing and youre always covered. 3. Not only are embedded contaminants a pain to remove but they can be very damaging to your wheels surfaces. Pitting, etching, and clear coat corrosion are all legitimate concerns when it comes to your wheels, especially if theyre unprotected. Directions: Before use, be sure the wheel is clean and dry. Apply Wheel Seal using a soft cloth. Let it cure by leaving it on the surface for several minutes, then use a soft cloth to hand buff for optimal protection. For maximum results, begin by cleaning the wheels with our Premium Wheel Cleanser, then prep with Exterior pH Neutralizer before applying Wheel Seal. Before applying, test a small amount in an inconspicuous place to check compatibility with surface.