SEQUENT MICROSYSTEMS RELAY CARDS
From 3 to 16 relays, stackable or RS485 daisy-chainable up to 128 relays.
STACKABILITY
All cards can be stacked up to eight levels, with the exception of the 3-Relays, which can be daisy-chained up to 32 cards. over the RS485 interface. All cards use only I2C to communicate with Raspberry Pi, leaving all GPIO pins available for the user.
CONNECTIVITY
Eight and 16 Relay cards have an RS485 transceiver jumper connected to Raspberry Pi serial port, enabling Raspberry Pi to talk to other RS485 devices. Four and 4 Relay cards have on-board processor and can be controlled by any PLC using MODBUS protocol over the RS485 port.
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
Home Automation 8-Layer Stackable HAT for Raspberry Pi | Sixteen Relays 8-Layer Stackable HAT for Raspberry Pi | Eight Relays 8-Layer Stackable HAT for Raspberry Pi | Four Relays four HV Inputs 8-Layer Stackable HAT for Raspberry Pi | Three Heady Duty 40A/240V Relays for Raspberry Pi | |
Relays | Eight Relays N.O. 3A, 24VAC/DC | Sixteen Relays N.O 2A, 24VAC/DC | Eight Relays N.O/N.C 4A, 24VDC/120VAC | Four Relays N.O, N.C, 8A, 24VDC/240VAC | Three Heavy Duty Relays switching up to 40A and 240VAC |
Opto-inputs | Eight optically isolated digital inputs | Four optically isolated digital inputs | |||
Analog Inputs | 8 x 12-bit A/D | ||||
Analog Outputs | 8 x 0-10V 13 bit D/A | ||||
Pluggable Connectors | Yes | Yes | Yes | Yes | Yes |
Solid State Outputs | Four PWM 24V/4A open-drain outputs | ||||
RS485 Port | Yes | Yes | Yes | Yes | |
MODBUS RTU | No | No | No | Slave | Slave |