You can make Mr. Signal Smart to do auto increased/decreased output. There has two modes.
Mode One:
Set a period and start/end value of output. The output will be automatically linear increased from start value to end value and linear decreased from end value to start value in a period. The auto increased/decrease output will be repeated as many times as you want.
Mode Two:
Advanced setting, the changing of output is determined by more parameters.
Type One:
After setting the starting point, ending and cycles the equipment can start working. Preset Values:
You may need only several fixed value of output in your daily work. The product allow you to customize 9 presetting value for you to quick output.
Converting Signal: Input can be converted into another kind of output. For example, Input Hz signal, then convert them into current output.
Real-time Curve:
The input/output changing can be displayed as curves. You can set the capture period and zoom in the curves according to the max and min.
Display as Range/Actual Value:
Input and output value can be displayed as actual value or range according to your wish. Actual value corresponds to range linearly. For example, 4-20mA corresponds to 0-100, then 4mA corresponds to 0, 12mA corresponds to 50, 20mA corresponds to 100. You can vary correspondence between actual value and range.
Package Included:
1x MR9270S signal generator
1x 10A / 4MM test clip (black)
1x 10A / 4MM test clip (red)
1x 10A / 4MM test clip (blue)
1x 10A / 4MM test clip (yellow)
1x Charger
1x USB cable
1x RS485 Communication cable
1x RS485 Adapter
1x Portable bag
1x User Manual
1x Certificate